Post Stock Login Register

GB/T 1299 3Cr2W8V vs IS 1570 (Part 6) XT33W9Cr3V4

Close Alternative — 78.1% match based on chemical composition and mechanical property overlap.

GB/T 1299 3Cr2W8V (GB/T 1299-2014) and IS 1570 (Part 6) XT33W9Cr3V4 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 3Cr2W8V is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 6) XT33W9Cr3V4 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 1299 3Cr2W8V vs IS 1570 (Part 6) XT33W9Cr3V4 is a 78.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 78.1%.

Frequently Compared With GB/T 1299 3Cr2W8V:
GOST 5950 3H2W8F GB/T 1299 4Cr5MoSiV EN ISO 683-17 100Cr6 AISI 52100 GOST 5950 4H5MFS IS 1570 (Part 6) 133T3 DIN EN ISO 4957 1.2344 IS 3748 103T3 IS 3748 50T8 IS 3748 70T3 IS 3748 55T8 IS 3748 133T3
Match Breakdown
CHEMISTRY MATCH
78.1%
MECHANICAL MATCH
No shared data
OVERALL
78.1%
Specifications
Property GB/T 1299 3Cr2W8V IS 1570 (Part 6) XT33W9Cr3V4
Standard GB/T 1299-2014 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.30-0.40 0.25-0.40
Si (%) 0.20-0.40 0.10-0.35
Mn (%) 0.20-0.50 0.20-0.40
Cr (%) 2.20-2.70 2.80-3.30
W (%) 7.50-9.00 8.0-10.0
V (%) 0.20-0.50 0.25-0.50
P (%) 0.030 max <=0.035
S (%) 0.030 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 3Cr2W8V IS 1570 (Part 6) XT33W9Cr3V4
Tensile Strength 1180-1380 MPa Not specified
Yield Strength 980-1180 MPa Not specified
Elongation 10-14% Not specified
Hardness 48-54 HRC Not specified
Typical Applications
GB/T 1299 3Cr2W8V
Used for hot forging dies, extrusion dies, die-casting molds, hot punches, and hot shear blades.
IS 1570 (Part 6) XT33W9Cr3V4
Not documented
Can GB/T 1299 3Cr2W8V Be Substituted With IS 1570 (Part 6) XT33W9Cr3V4?
GB/T 1299 3Cr2W8V and IS 1570 (Part 6) XT33W9Cr3V4 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
GB/T 1299 3Cr2W8V
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–2900 mm (110.24–114.17 in)
IS 1570 (Part 6) XT33W9Cr3V4
No active listings currently.
On M-EX Right Now
GB/T 1299 3Cr2W8V
2 active listings and RFQs →
IS 1570 (Part 6) XT33W9Cr3V4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 3Cr2W8V and IS 1570 (Part 6) XT33W9Cr3V4?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 1299 3Cr2W8V be substituted with IS 1570 (Part 6) XT33W9Cr3V4?
GB/T 1299 3Cr2W8V and IS 1570 (Part 6) XT33W9Cr3V4 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.