Post Stock Login Register

GB/T 1299 CrWMn vs GOST 5950 4H5MFS

Minimal Match — 32.8% match based on chemical composition and mechanical property overlap.

GB/T 1299 CrWMn (GB/T 1299-2014) and GOST 5950 4H5MFS (GOST 5950-2000) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 CrWMn is typically used for used for dies, thread rolling tools, punches, gauges, woodworking cutters, and measuring instruments., while GOST 5950 4H5MFS is commonly used for used for die casting dies, forging tools, extrusion dies, punches, and hot shear blades.. GB/T 1299 CrWMn is defined under Guobiao Standards (GB/T) (China).

As per chemical composition, GB/T 1299 CrWMn vs GOST 5950 4H5MFS is a 49.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 32.8%.

Frequently Compared With GB/T 1299 CrWMn:
GB/T 1299 4Cr5MoSiV EN ISO 683-17 100Cr6 GOST 5950 3H2W8F DIN EN ISO 4957 1.2379 AISI 52100 GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 EN ISO 4957 1.2316 GB/T 1299 3Cr2W8V
Other Tool & Die Steels Grades to Compare With GB/T 1299 CrWMn:
IS 3748 103T3 IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
49.2%
MECHANICAL MATCH
0%
OVERALL
32.8%
Specifications
Property GB/T 1299 CrWMn GOST 5950 4H5MFS
Standard GB/T 1299-2014 GOST 5950-2000
Category Tool & Die Steels Tool & Die Steels
C (%) 0.90-1.05 0.35-0.45
Si (%) 0.15-0.35 0.8-1.2
Mn (%) 0.80-1.10 Not specified
Cr (%) 0.50-0.80 4.5-5.5
W (%) 0.50-0.80 Not specified
P (%) 0.030 max Not specified
S (%) 0.030 max Not specified
Mo (%) Not specified 1.2-1.6
V (%) Not specified 0.3-0.6
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 CrWMn GOST 5950 4H5MFS
Tensile Strength 900-1100 MPa 1350-1650 MPa
Yield Strength 700-900 MPa 1150 MPa min
Elongation 8-12% 9% min
Hardness 60-64 HRC 44-50 HRC
Typical Applications
GB/T 1299 CrWMn
Used for dies, thread rolling tools, punches, gauges, woodworking cutters, and measuring instruments.
GOST 5950 4H5MFS
Used for die casting dies, forging tools, extrusion dies, punches, and hot shear blades.
Key Differences
Can GB/T 1299 CrWMn Be Substituted With GOST 5950 4H5MFS?
GB/T 1299 CrWMn and GOST 5950 4H5MFS share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1299 CrWMn
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 3500–4000 mm (137.8–157.48 in)
GOST 5950 4H5MFS
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
GB/T 1299 CrWMn
2 active listings and RFQs →
GOST 5950 4H5MFS
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 CrWMn and GOST 5950 4H5MFS?
GB/T 1299 CrWMn specifies Mn, W, P, S which are not specified for GOST 5950 4H5MFS. GOST 5950 4H5MFS specifies Mo, V which are not specified for GB/T 1299 CrWMn.
Can GB/T 1299 CrWMn be substituted with GOST 5950 4H5MFS?
GB/T 1299 CrWMn and GOST 5950 4H5MFS share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.