Post Stock Login Register

GB/T 1299 T10 vs SAE J404 1330

Related Material — 65% match based on chemical composition and mechanical property overlap.

GB/T 1299 T10 (GB/T 1299-2014) and SAE J404 1330 (SAE J404:2009) are both steel grades. GB/T 1299 T10 is classified under Tool & Die Steels, while SAE J404 1330 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. GB/T 1299 T10 is typically used for used for chisels, files, hand saws, drills, woodworking tools, and cold shearing blades., while SAE J404 1330 is commonly used for shafts, heavy duty gears, structural components. GB/T 1299 T10 is defined under Guobiao Standards (GB/T), originating from China, while SAE J404 1330 is defined under SAE International, originating from United States.

As per chemical composition, GB/T 1299 T10 vs SAE J404 1330 is a 84.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With GB/T 1299 T10:
GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 AISI 52100 EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 GB/T 1299 3Cr2W8V EN ISO 683-17 100Cr6 GOST 5950 4H5MFS GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
84.8%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property GB/T 1299 T10 SAE J404 1330
Standard GB/T 1299-2014 SAE J404:2009
Category Tool & Die Steels Alloy Steel
C (%) 0.95-1.04 0.28-0.33
Si (%) 0.17-0.37 0.15-0.35
Mn (%) 0.35-0.65 1.60-1.80
P (%) 0.030 max <=0.030
S (%) 0.030 max <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 T10 SAE J404 1330
Tensile Strength 750-950 MPa Not specified
Yield Strength 500-700 MPa Not specified
Elongation 8-12% Not specified
Hardness 60-65 HRC Not specified
Typical Applications
GB/T 1299 T10
Used for chisels, files, hand saws, drills, woodworking tools, and cold shearing blades.
SAE J404 1330
Shafts, heavy duty gears, structural components
Key Differences
Can GB/T 1299 T10 Be Substituted With SAE J404 1330?
GB/T 1299 T10 and SAE J404 1330 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1299 T10
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–3000 mm (110.24–118.11 in)
SAE J404 1330
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5000–6100 mm (196.85–240.16 in)
On M-EX Right Now
GB/T 1299 T10
2 active listings and RFQs →
SAE J404 1330
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 T10 and SAE J404 1330?
Different category: GB/T 1299 T10 is Tool & Die Steels, SAE J404 1330 is Alloy Steel.
Can GB/T 1299 T10 be substituted with SAE J404 1330?
GB/T 1299 T10 and SAE J404 1330 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.