Post Stock Login Register

GB/T 1299 T10 vs GB/T 1299 4Cr5MoSiV1

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 1299 T10 (GB/T 1299-2014) and GB/T 1299 4Cr5MoSiV1 (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 T10 is typically used for used for chisels, files, hand saws, drills, woodworking tools, and cold shearing blades., while GB/T 1299 4Cr5MoSiV1 is commonly used for die casting dies, forging dies, extrusion tools. GB/T 1299 T10 is defined under Guobiao Standards (GB/T), originating from China, while GB/T 1299 4Cr5MoSiV1 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 1299 T10 vs GB/T 1299 4Cr5MoSiV1 is a 59.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 1299 T10:
GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2344 DIN EN ISO 4957 1.2379 AISI 52100 EN ISO 4957 1.2316 GB/T 1299 3Cr2W8V EN ISO 683-17 100Cr6 GB/T 1299 4Cr5MoSiV GOST 5950 4H5MFS IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3
Match Breakdown
CHEMISTRY MATCH
59.1%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GB/T 1299 T10 GB/T 1299 4Cr5MoSiV1
Standard GB/T 1299-2014 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 0.95-1.04 0.32–0.45
Si (%) 0.17-0.37 0.80–1.20
Mn (%) 0.35-0.65 0.20–0.50
P (%) 0.030 max Not specified
S (%) 0.030 max Not specified
Cr (%) Not specified 4.75–5.50
Mo (%) Not specified 1.20–1.75
V (%) Not specified 0.80–1.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 T10 GB/T 1299 4Cr5MoSiV1
Tensile Strength 750-950 MPa Not specified
Yield Strength 500-700 MPa Not specified
Elongation 8-12% Not specified
Hardness 60-65 HRC Not specified
Hardness HRC (hardened) Not specified 42–54
Hardness HB (annealed) Not specified ≤235
Typical Applications
GB/T 1299 T10
Used for chisels, files, hand saws, drills, woodworking tools, and cold shearing blades.
GB/T 1299 4Cr5MoSiV1
Die casting dies, forging dies, extrusion tools
Key Differences
Can GB/T 1299 T10 Be Substituted With GB/T 1299 4Cr5MoSiV1?
GB/T 1299 T10 and GB/T 1299 4Cr5MoSiV1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1299 T10
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–3000 mm (110.24–118.11 in)
GB/T 1299 4Cr5MoSiV1
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2700–4100 mm (106.3–161.42 in)
On M-EX Right Now
GB/T 1299 T10
2 active listings and RFQs →
GB/T 1299 4Cr5MoSiV1
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 T10 and GB/T 1299 4Cr5MoSiV1?
GB/T 1299 T10 specifies P, S which are not specified for GB/T 1299 4Cr5MoSiV1. GB/T 1299 4Cr5MoSiV1 specifies Cr, Mo, V which are not specified for GB/T 1299 T10.
Can GB/T 1299 T10 be substituted with GB/T 1299 4Cr5MoSiV1?
GB/T 1299 T10 and GB/T 1299 4Cr5MoSiV1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.