Post Stock Login Register

GB/T 1299 T10 vs IS 1570 (Part 6) 118T3

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 1299 T10 (GB/T 1299-2014) and IS 1570 (Part 6) 118T3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 T10 is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 6) 118T3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 1299 T10 vs IS 1570 (Part 6) 118T3 is a 68.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 1299 T10:
GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2379 AISI 52100 EN ISO 4957 1.2316 GB/T 1299 3Cr2W8V EN ISO 683-17 100Cr6 GOST 5950 4H5MFS GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
68.6%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property GB/T 1299 T10 IS 1570 (Part 6) 118T3
Standard GB/T 1299-2014 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.95-1.04 1.10-1.25
Si (%) 0.17-0.37 0.10-0.30
Mn (%) 0.35-0.65 <=0.40
P (%) 0.030 max <=0.035
S (%) 0.030 max <=0.035
Cr (%) Not specified <=0.20
Cu (%) Not specified <=0.25
Ni (%) Not specified <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 T10 IS 1570 (Part 6) 118T3
Tensile Strength 750-950 MPa Not specified
Yield Strength 500-700 MPa Not specified
Elongation 8-12% Not specified
Hardness 60-65 HRC Not specified
Typical Applications
GB/T 1299 T10
Used for chisels, files, hand saws, drills, woodworking tools, and cold shearing blades.
IS 1570 (Part 6) 118T3
Not documented
Key Differences
Can GB/T 1299 T10 Be Substituted With IS 1570 (Part 6) 118T3?
GB/T 1299 T10 and IS 1570 (Part 6) 118T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1299 T10
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–3000 mm (110.24–118.11 in)
IS 1570 (Part 6) 118T3
No active listings currently.
On M-EX Right Now
GB/T 1299 T10
2 active listings and RFQs →
IS 1570 (Part 6) 118T3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 T10 and IS 1570 (Part 6) 118T3?
IS 1570 (Part 6) 118T3 specifies Cr, Cu, Ni which are not specified for GB/T 1299 T10.
Can GB/T 1299 T10 be substituted with IS 1570 (Part 6) 118T3?
GB/T 1299 T10 and IS 1570 (Part 6) 118T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.