Post Stock Login Register

GB/T 1299 T10 vs IS 1570 (Part 6) T103V2

Close Alternative — 83.8% match based on chemical composition and mechanical property overlap.

GB/T 1299 T10 (GB/T 1299-2014) and IS 1570 (Part 6) T103V2 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 T10 is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 6) T103V2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 1299 T10 vs IS 1570 (Part 6) T103V2 is a 83.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 83.8%.

Frequently Compared With GB/T 1299 T10:
GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 AISI 52100 EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 GB/T 1299 3Cr2W8V EN ISO 683-17 100Cr6 GOST 5950 4H5MFS GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
83.8%
MECHANICAL MATCH
No shared data
OVERALL
83.8%
Specifications
Property GB/T 1299 T10 IS 1570 (Part 6) T103V2
Standard GB/T 1299-2014 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.95-1.04 0.95-1.10
Si (%) 0.17-0.37 0.10-0.35
Mn (%) 0.35-0.65 <=0.40
P (%) 0.030 max <=0.035
S (%) 0.030 max <=0.035
V (%) Not specified 0.15-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 T10 IS 1570 (Part 6) T103V2
Tensile Strength 750-950 MPa Not specified
Yield Strength 500-700 MPa Not specified
Elongation 8-12% Not specified
Hardness 60-65 HRC Not specified
Typical Applications
GB/T 1299 T10
Used for chisels, files, hand saws, drills, woodworking tools, and cold shearing blades.
IS 1570 (Part 6) T103V2
Not documented
Key Differences
Can GB/T 1299 T10 Be Substituted With IS 1570 (Part 6) T103V2?
GB/T 1299 T10 and IS 1570 (Part 6) T103V2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
GB/T 1299 T10
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–3000 mm (110.24–118.11 in)
IS 1570 (Part 6) T103V2
No active listings currently.
On M-EX Right Now
GB/T 1299 T10
2 active listings and RFQs →
IS 1570 (Part 6) T103V2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 T10 and IS 1570 (Part 6) T103V2?
IS 1570 (Part 6) T103V2 specifies V which is not specified for GB/T 1299 T10.
Can GB/T 1299 T10 be substituted with IS 1570 (Part 6) T103V2?
GB/T 1299 T10 and IS 1570 (Part 6) T103V2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.