Post Stock Login Register

GB/T 1591 Q460C vs EN 10025-3 S460N

Strong Match — 85.2% match based on chemical composition and mechanical property overlap.

GB/T 1591 Q460C (GB/T 1591:2018) and EN 10025-3 S460N (EN 10025-3:2019) are both steel grades. Both fall under the Structural Steel category. GB/T 1591 Q460C is defined under Guobiao Standards (GB/T), originating from China, while EN 10025-3 S460N is defined under European Standard (EN), originating from Europe.

As per chemical composition, GB/T 1591 Q460C vs EN 10025-3 S460N is a 79.2% match. As per mechanical properties, the match is 97.2%. Combined, this makes them a strong match overall at 85.2%.

Frequently Compared With GB/T 1591 Q460C:
GOST 19281 09G2S CSA G40.21 260W CSA G40.21 350W CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Other Structural Steel Grades to Compare With GB/T 1591 Q460C:
AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 400A ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
79.2%
MECHANICAL MATCH
97.2%
OVERALL
85.2%
Specifications
Property GB/T 1591 Q460C EN 10025-3 S460N
Standard GB/T 1591:2018 EN 10025-3:2019
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.20
Si (%) <=0.55 <=0.60
Mn (%) <=1.80 1.00-1.70
P (%) <=0.030 <=0.030
S (%) <=0.030 <=0.025
Nb (%) <=0.05 <=0.05
V (%) <=0.13 <=0.20
Ti (%) <=0.05 <=0.05
Cr (%) <=0.30 <=0.30
Ni (%) <=0.80 <=0.80
Cu (%) <=0.40 <=0.55
Mo (%) <=0.20 <=0.10
N (%) <=0.015 <=0.025
B (%) <=0.004 Not specified
Al (%) Not specified >=0.02
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1591 Q460C EN 10025-3 S460N
Tensile Strength 550-720 MPa 540-720 MPa
Yield Strength >=460 MPa >=460 MPa
Condition Hot-rolled (as-rolled), nominal thickness or diameter up to 16 mm for yield; tensile strength for up to 100 mm Normalized or normalized rolled (N), nominal thickness up to 16 mm (tensile strength up to 100 mm), Table 4
Elongation Not specified >=17%
Typical Applications
GB/T 1591 Q460C
General structure for engineering (plates, strips, bars and sections)
EN 10025-3 S460N
Not documented
Key Differences
Can GB/T 1591 Q460C Be Substituted With EN 10025-3 S460N?
GB/T 1591 Q460C and EN 10025-3 S460N overlap closely enough on chemistry and mechanical properties that EN 10025-3 S460N is often considered as a substitute for GB/T 1591 Q460C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
GB/T 1591 Q460C
0 active listings and RFQs →
EN 10025-3 S460N
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1591 Q460C and EN 10025-3 S460N?
GB/T 1591 Q460C specifies B which is not specified for EN 10025-3 S460N. EN 10025-3 S460N specifies Al which is not specified for GB/T 1591 Q460C.
Can GB/T 1591 Q460C be substituted with EN 10025-3 S460N?
GB/T 1591 Q460C and EN 10025-3 S460N overlap closely enough on chemistry and mechanical properties that EN 10025-3 S460N is often considered as a substitute for GB/T 1591 Q460C in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.