Post Stock Login Register

GB/T 18254 GCr15 vs GB/T 1299 3Cr2W8V

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 18254 GCr15 (GB/T 18254-2016) and GB/T 1299 3Cr2W8V (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 18254 GCr15 is typically used for ball bearings, roller bearings, bearing races, while GB/T 1299 3Cr2W8V is commonly used for used for hot forging dies, extrusion dies, die-casting molds, hot punches, and hot shear blades.. GB/T 18254 GCr15 is defined under Guobiao Standards (GB/T), originating from China, while GB/T 1299 3Cr2W8V is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 18254 GCr15 vs GB/T 1299 3Cr2W8V is a 64.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 18254 GCr15:
EN ISO 683-17 100Cr6 AISI 52100 GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2379 GB/T 1299 4Cr5MoSiV EN ISO 4957 1.2316 GOST 5950 4H5MFS GOST 5950 3H2W8F DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 IS 3748 103T3 IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
64.1%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GB/T 18254 GCr15 GB/T 1299 3Cr2W8V
Standard GB/T 18254-2016 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 0.95–1.05 0.30-0.40
Si (%) 0.15–0.35 0.20-0.40
Mn (%) 0.25–0.45 0.20-0.50
Cr (%) 1.40–1.65 2.20-2.70
S (%) ≤0.020 0.030 max
P (%) ≤0.025 0.030 max
W (%) Not specified 7.50-9.00
V (%) Not specified 0.20-0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 18254 GCr15 GB/T 1299 3Cr2W8V
Hardness HRC (hardened) 60–66 Not specified
Hardness HB (annealed) ≤179–207 Not specified
Tensile Strength Not specified 1180-1380 MPa
Yield Strength Not specified 980-1180 MPa
Elongation Not specified 10-14%
Hardness Not specified 48-54 HRC
Typical Applications
GB/T 18254 GCr15
Ball bearings, roller bearings, bearing races
GB/T 1299 3Cr2W8V
Used for hot forging dies, extrusion dies, die-casting molds, hot punches, and hot shear blades.
Key Differences
Can GB/T 18254 GCr15 Be Substituted With GB/T 1299 3Cr2W8V?
GB/T 18254 GCr15 and GB/T 1299 3Cr2W8V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 18254 GCr15
Round Bar → (23 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2700–6600 mm (106.3–259.84 in)
GB/T 1299 3Cr2W8V
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–2900 mm (110.24–114.17 in)
On M-EX Right Now
GB/T 18254 GCr15
23 active listings and RFQs →
GB/T 1299 3Cr2W8V
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 18254 GCr15 and GB/T 1299 3Cr2W8V?
GB/T 1299 3Cr2W8V specifies W, V which are not specified for GB/T 18254 GCr15.
Can GB/T 18254 GCr15 be substituted with GB/T 1299 3Cr2W8V?
GB/T 18254 GCr15 and GB/T 1299 3Cr2W8V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.