Post Stock Login Register

GB/T 3077 25MnTiBRE vs IS 4367 07Cr4Mo6

Minimal Match — 30.1% match based on chemical composition and mechanical property overlap.

GB/T 3077 25MnTiBRE (GB/T 3077:2015) and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 25MnTiBRE is defined under Guobiao Standards (GB/T), originating from China, while IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 25MnTiBRE vs IS 4367 07Cr4Mo6 is a 45.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 30.1%.

Frequently Compared With GB/T 3077 25MnTiBRE:
SAE J404 1330 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
45.1%
MECHANICAL MATCH
0%
OVERALL
30.1%
Specifications
Property GB/T 3077 25MnTiBRE IS 4367 07Cr4Mo6
Standard GB/T 3077:2015 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.22-0.28 <=0.12
Si (%) 0.20-0.45 0.15-0.60
Mn (%) 1.30-1.60 0.40-0.70
B (%) 0.0008-0.0035 Not specified
Ti (%) 0.04-0.10 Not specified
P (%) <=0.030 <=0.035
S (%) <=0.030 <=0.035
Cu (%) <=0.30 Not specified
Ni (%) Not specified <=0.30
Cr (%) Not specified 0.70-1.10
Mo (%) Not specified 0.45-0.65
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 25MnTiBRE IS 4367 07Cr4Mo6
Tensile Strength >=1380 MPa 380-550 MPa
Elongation >=10% >=19%
Hardness <=229 HB Not specified
Condition Quenched and tempered, test sample Specimen (size not stated); hardness is for bars delivered annealed or high temperature tempered Normalised and tempered, ruling section up to 40 mm
Yield Strength Not specified 225 MPa min
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Typical Applications
GB/T 3077 25MnTiBRE
Hot-rolled or forged structural alloy steel bars
IS 4367 07Cr4Mo6
Not documented
Key Differences
Can GB/T 3077 25MnTiBRE Be Substituted With IS 4367 07Cr4Mo6?
GB/T 3077 25MnTiBRE and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 3077 25MnTiBRE
0 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 25MnTiBRE and IS 4367 07Cr4Mo6?
GB/T 3077 25MnTiBRE specifies B, Ti, Cu which are not specified for IS 4367 07Cr4Mo6. IS 4367 07Cr4Mo6 specifies Ni, Cr, Mo which are not specified for GB/T 3077 25MnTiBRE.
Can GB/T 3077 25MnTiBRE be substituted with IS 4367 07Cr4Mo6?
GB/T 3077 25MnTiBRE and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.