Post Stock Login Register

GB/T 3077 35Cr2Ni4Mo vs EN 10083-1 36NiCrMo16

Related Material — 68.1% match based on chemical composition and mechanical property overlap.

GB/T 3077 35Cr2Ni4Mo (GB/T 3077:2015) and EN 10083-1 36NiCrMo16 (EN 10083-1:1996) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 35Cr2Ni4Mo is typically used for hot-rolled or forged structural alloy steel bars, while EN 10083-1 36NiCrMo16 is commonly used for quenched and tempered machine parts (clause 1.1). GB/T 3077 35Cr2Ni4Mo is defined under Guobiao Standards (GB/T), originating from China, while EN 10083-1 36NiCrMo16 is defined under European Standard (EN), originating from Europe.

As per chemical composition, GB/T 3077 35Cr2Ni4Mo vs EN 10083-1 36NiCrMo16 is a 89.7% match. As per mechanical properties, the match is 25%. Combined, this makes them a related material overall at 68.1%.

Frequently Compared With GB/T 3077 35Cr2Ni4Mo:
IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
89.7%
MECHANICAL MATCH
25%
OVERALL
68.1%
Specifications
Property GB/T 3077 35Cr2Ni4Mo EN 10083-1 36NiCrMo16
Standard GB/T 3077:2015 EN 10083-1:1996
Category Alloy Steel Alloy Steel
C (%) 0.32-0.39 0.32-0.39
Si (%) 0.17-0.37 <=0.40
Mn (%) 0.50-0.80 0.30-0.60
Cr (%) 1.60-2.00 1.60-2.00
Mo (%) 0.25-0.45 0.25-0.45
Ni (%) 3.60-4.10 3.60-4.10
P (%) <=0.030 <=0.030
S (%) <=0.030 <=0.025
Cu (%) <=0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 35Cr2Ni4Mo EN 10083-1 36NiCrMo16
Tensile Strength >=1130 MPa 1250 to 1450 MPa
Yield Strength >=980 MPa 1050 MPa min
Elongation >=10% 9% min
Hardness <=269 HB Soft annealed: 269 HB max
Condition Quenched and tempered, test sample 25 mm; hardness is for bars delivered annealed or high temperature tempered Quenched and tempered, ruling section d <= 16 mm
Typical Applications
GB/T 3077 35Cr2Ni4Mo
Hot-rolled or forged structural alloy steel bars
EN 10083-1 36NiCrMo16
Quenched and tempered machine parts (clause 1.1)
Key Differences
Can GB/T 3077 35Cr2Ni4Mo Be Substituted With EN 10083-1 36NiCrMo16?
GB/T 3077 35Cr2Ni4Mo and EN 10083-1 36NiCrMo16 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 3077 35Cr2Ni4Mo
0 active listings and RFQs →
EN 10083-1 36NiCrMo16
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 35Cr2Ni4Mo and EN 10083-1 36NiCrMo16?
GB/T 3077 35Cr2Ni4Mo specifies Cu which is not specified for EN 10083-1 36NiCrMo16.
Can GB/T 3077 35Cr2Ni4Mo be substituted with EN 10083-1 36NiCrMo16?
GB/T 3077 35Cr2Ni4Mo and EN 10083-1 36NiCrMo16 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.