Related Material — 64% match
based on chemical composition and mechanical property overlap.
GB/T 700 Q275C (GB/T 700:2006) and ASTM A1008 SS Grade 80 (ASTM A1008) are both steel grades.
Both fall under the Structural Steel category.
GB/T 700 Q275C is typically used for hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering, while ASTM A1008 SS Grade 80 is commonly used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts.
GB/T 700 Q275C is defined under Guobiao Standards (GB/T), originating from China, while ASTM A1008 SS Grade 80 is defined under ASTM International, originating from United States.
As per chemical composition, GB/T 700 Q275C vs ASTM A1008 SS Grade 80 is a 96.1% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a related material overall at 64%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
GB/T 700 Q275C
ASTM A1008 SS Grade 80
Tensile Strength
410-540 MPa
570 MPa min
Yield Strength
>=275 MPa
550 MPa min
Elongation
>=22%
10% min
Condition
Hot rolled, controlled rolled or normalized; yield up to 16 mm, elongation up to 40 mm (N/mm2 = MPa)
Not specified
Typical Applications
GB/T 700 Q275C
Hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering
Can GB/T 700 Q275C Be Substituted With ASTM A1008 SS Grade 80?
GB/T 700 Q275C and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between GB/T 700 Q275C and ASTM A1008 SS Grade 80?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 700 Q275C be substituted with ASTM A1008 SS Grade 80?
GB/T 700 Q275C and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.