Post Stock Login Register

GOST 14959 60S2A vs IS 1570 (Part 4) 103Cr6

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

GOST 14959 60S2A (GOST 14959-2016) and IS 1570 (Part 4) 103Cr6 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. IS 1570 (Part 4) 103Cr6 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, GOST 14959 60S2A vs IS 1570 (Part 4) 103Cr6 is a 71.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With GOST 14959 60S2A:
GOST 4543 12HN3A UNI 11234 100Cr6 NF A35-565 100C6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6 IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
71.4%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property GOST 14959 60S2A IS 1570 (Part 4) 103Cr6
Standard GOST 14959-2016 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.56-0.64 0.95-1.10
Si (%) 1.5-2.0 0.10-0.35
Mn (%) 0.6-0.9 0.25-0.45
Cr (%) 0.35 max 1.40-1.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 14959 60S2A IS 1570 (Part 4) 103Cr6
Tensile Strength 1270-1570 MPa Not specified
Yield Strength 1080 MPa min Not specified
Elongation 6% min Not specified
Hardness 44-52 HRC Not specified
Typical Applications
GOST 14959 60S2A
Used for coil springs, suspension springs, washers, torsion bars, and railway springs.
IS 1570 (Part 4) 103Cr6
Not documented
Can GOST 14959 60S2A Be Substituted With IS 1570 (Part 4) 103Cr6?
GOST 14959 60S2A and IS 1570 (Part 4) 103Cr6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 14959 60S2A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5400–5900 mm (212.6–232.28 in)
IS 1570 (Part 4) 103Cr6
No active listings currently.
On M-EX Right Now
GOST 14959 60S2A
2 active listings and RFQs →
IS 1570 (Part 4) 103Cr6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 14959 60S2A and IS 1570 (Part 4) 103Cr6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GOST 14959 60S2A be substituted with IS 1570 (Part 4) 103Cr6?
GOST 14959 60S2A and IS 1570 (Part 4) 103Cr6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.