Post Stock Login Register

GOST 4543 15H2NM vs IS 4367 07Cr4Mo6

Minimal Match — 37% match based on chemical composition and mechanical property overlap.

GOST 4543 15H2NM (GOST 4543-2016) and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, GOST 4543 15H2NM vs IS 4367 07Cr4Mo6 is a 55.4% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 37%.

Frequently Compared With GOST 4543 15H2NM:
NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 07Cr4Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 103Cr4 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
55.4%
MECHANICAL MATCH
0%
OVERALL
37%
Specifications
Property GOST 4543 15H2NM IS 4367 07Cr4Mo6
Standard GOST 4543-2016 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.12-0.18 <=0.12
Cr (%) 1.25-1.65 0.70-1.10
Ni (%) 1.4-1.8 <=0.30
Mo (%) 0.15-0.3 0.45-0.65
Mn (%) 0.3-0.6 0.40-0.70
Si (%) Not specified 0.15-0.60
S (%) Not specified <=0.035
P (%) Not specified <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 4543 15H2NM IS 4367 07Cr4Mo6
Tensile Strength 900-1100 MPa 380-550 MPa
Yield Strength 735 MPa min 225 MPa min
Elongation 10% min >=19%
Hardness 58-62 HRC (case) Not specified
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Condition Not specified Normalised and tempered, ruling section up to 40 mm
Typical Applications
GOST 4543 15H2NM
Used for heavy-duty gears, shafts, couplings, bearings, and transmission parts.
IS 4367 07Cr4Mo6
Not documented
Key Differences
Can GOST 4543 15H2NM Be Substituted With IS 4367 07Cr4Mo6?
GOST 4543 15H2NM and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 4543 15H2NM
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6000–6500 mm (236.22–255.91 in)
IS 4367 07Cr4Mo6
No active listings currently.
On M-EX Right Now
GOST 4543 15H2NM
2 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 4543 15H2NM and IS 4367 07Cr4Mo6?
IS 4367 07Cr4Mo6 specifies Si, S, P which are not specified for GOST 4543 15H2NM.
Can GOST 4543 15H2NM be substituted with IS 4367 07Cr4Mo6?
GOST 4543 15H2NM and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.