Post Stock Login Register

GOST 4543 40HM vs EN 10028-2 10CrMo9-10

Minimal Match — 40.6% match based on chemical composition and mechanical property overlap.

GOST 4543 40HM (GOST 4543-2016) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. GOST 4543 40HM is typically used for used for gears, shafts, spindles, bolts, and hydraulic components., while EN 10028-2 10CrMo9-10 is commonly used for flat products for pressure purposes. EN 10028-2 10CrMo9-10 is defined under European Standard (EN) (Europe).

As per chemical composition, GOST 4543 40HM vs EN 10028-2 10CrMo9-10 is a 60.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 40.6%.

Frequently Compared With GOST 4543 40HM:
GOST 4543 12HN3A NF A35-565 100C6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 4367 10Cr9Mo10 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6
Match Breakdown
CHEMISTRY MATCH
60.9%
MECHANICAL MATCH
0%
OVERALL
40.6%
Specifications
Property GOST 4543 40HM EN 10028-2 10CrMo9-10
Standard GOST 4543-2016 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.36-0.44 0.08-0.14
Cr (%) 0.9-1.2 2.00-2.50
Mo (%) 0.15-0.3 0.90-1.10
Mn (%) 0.5-0.8 0.40-0.80
Si (%) 0.17-0.37 <=0.50
P (%) Not specified <=0.020
S (%) Not specified <=0.010
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 4543 40HM EN 10028-2 10CrMo9-10
Tensile Strength 980-1180 MPa 480-630 MPa
Yield Strength 835 MPa min >=310 MPa
Elongation 10% min >=18%
Hardness 285-341 HB Not specified
Condition Not specified Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
GOST 4543 40HM
Used for gears, shafts, spindles, bolts, and hydraulic components.
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can GOST 4543 40HM Be Substituted With EN 10028-2 10CrMo9-10?
GOST 4543 40HM and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 4543 40HM
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6300–7000 mm (248.03–275.59 in)
EN 10028-2 10CrMo9-10
No active listings currently.
On M-EX Right Now
GOST 4543 40HM
2 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 4543 40HM and EN 10028-2 10CrMo9-10?
EN 10028-2 10CrMo9-10 specifies P, S, N, Cu which are not specified for GOST 4543 40HM.
Can GOST 4543 40HM be substituted with EN 10028-2 10CrMo9-10?
GOST 4543 40HM and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.