Post Stock Login Register

GOST 4543 40XH vs IS 4367 10Cr9Mo10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 4543 40XH (GOST 4543-2016) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, GOST 4543 40XH vs IS 4367 10Cr9Mo10 is a 57% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 4543 40XH:
GOST 4543 12HN3A UNI 11234 100Cr6 NF A35-565 100C6 GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
57%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 4543 40XH IS 4367 10Cr9Mo10
Standard GOST 4543-2016 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.36-0.44 <=0.15
Si (%) 0.17-0.37 <=0.50
Mn (%) 0.50-0.80 0.40-0.70
S (%) <=0.035 <=0.035
P (%) <=0.035 <=0.035
Cr (%) 0.45-0.75 2.00-2.50
Ni (%) 1.00-1.40 <=0.30
Cu (%) <=0.30 Not specified
Mo (%) Not specified 0.90-1.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 4543 40XH IS 4367 10Cr9Mo10
Tensile Strength 980-1180 MPa 410-590 MPa
Yield Strength >=785 MPa 245 MPa min
Elongation >=10% >=18%
Hardness 241-285 HB Not specified
Izod Impact Not specified 55 J min
Hardness (soft annealed) Not specified <=187 HB
Condition Not specified Normalised and tempered, ruling section up to 50 mm
Typical Applications
GOST 4543 40XH
heavy-duty gears, transmission shafts, axles, high-strength fasteners, forged machinery parts
IS 4367 10Cr9Mo10
Not documented
Key Differences
Can GOST 4543 40XH Be Substituted With IS 4367 10Cr9Mo10?
GOST 4543 40XH and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 4543 40XH
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5900–6100 mm (232.28–240.16 in)
IS 4367 10Cr9Mo10
No active listings currently.
On M-EX Right Now
GOST 4543 40XH
2 active listings and RFQs →
IS 4367 10Cr9Mo10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 4543 40XH and IS 4367 10Cr9Mo10?
GOST 4543 40XH specifies Cu which is not specified for IS 4367 10Cr9Mo10. IS 4367 10Cr9Mo10 specifies Mo which is not specified for GOST 4543 40XH.
Can GOST 4543 40XH be substituted with IS 4367 10Cr9Mo10?
GOST 4543 40XH and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.