Post Stock Login Register

GOST 5950 9HF vs GB/T 1299 4Cr5MoSiV

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 5950 9HF (GOST 5950-2000) and GB/T 1299 4Cr5MoSiV (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. GOST 5950 9HF is typically used for used for dies, punches, reamers, gauges, and woodworking cutters., while GB/T 1299 4Cr5MoSiV is commonly used for die casting dies, extrusion tooling. GB/T 1299 4Cr5MoSiV is defined under Guobiao Standards (GB/T) (China).

As per chemical composition, GOST 5950 9HF vs GB/T 1299 4Cr5MoSiV is a 62.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 5950 9HF:
GOST 5950 3H2W8F EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 GOST 5950 4H5MFS1 EN ISO 683-17 100Cr6 GOST 5950 4H5MFS GB/T 1299 3Cr2W8V AISI 52100 IS 1570 (Part 6) 103T3
Other Tool & Die Steels Grades to Compare With GOST 5950 9HF:
IS 3748 103T3
Match Breakdown
CHEMISTRY MATCH
62.2%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 5950 9HF GB/T 1299 4Cr5MoSiV
Standard GOST 5950-2000 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 0.85-0.95 0.32–0.45
Cr (%) 0.9-1.2 4.75–5.50
V (%) 0.15-0.3 0.30–0.60
Mn (%) 0.3-0.6 0.20–0.50
Si (%) 0.15-0.35 0.80–1.20
Mo (%) Not specified 1.10–1.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 5950 9HF GB/T 1299 4Cr5MoSiV
Tensile Strength 900-1100 MPa Not specified
Yield Strength 700 MPa min Not specified
Elongation 8% min Not specified
Hardness 60-64 HRC Not specified
Hardness HRC (hardened) Not specified 40–54
Hardness HB (annealed) Not specified ≤235
Typical Applications
GOST 5950 9HF
Used for dies, punches, reamers, gauges, and woodworking cutters.
GB/T 1299 4Cr5MoSiV
Die casting dies, extrusion tooling
Key Differences
Can GOST 5950 9HF Be Substituted With GB/T 1299 4Cr5MoSiV?
GOST 5950 9HF and GB/T 1299 4Cr5MoSiV share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 5950 9HF
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–3500 mm (98.43–137.8 in)
GB/T 1299 4Cr5MoSiV
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
GOST 5950 9HF
2 active listings and RFQs →
GB/T 1299 4Cr5MoSiV
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 5950 9HF and GB/T 1299 4Cr5MoSiV?
GB/T 1299 4Cr5MoSiV specifies Mo which is not specified for GOST 5950 9HF.
Can GOST 5950 9HF be substituted with GB/T 1299 4Cr5MoSiV?
GOST 5950 9HF and GB/T 1299 4Cr5MoSiV share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.