Post Stock Login Register

GOST 5950 9HF vs GOST 5950 4H5MFS

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 5950 9HF (GOST 5950-2000) and GOST 5950 4H5MFS (GOST 5950-2000) are both steel grades. Both fall under the Tool & Die Steels category. GOST 5950 9HF is typically used for used for dies, punches, reamers, gauges, and woodworking cutters., while GOST 5950 4H5MFS is commonly used for used for die casting dies, forging tools, extrusion dies, punches, and hot shear blades..

As per chemical composition, GOST 5950 9HF vs GOST 5950 4H5MFS is a 59.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 5950 9HF:
GOST 5950 3H2W8F EN ISO 4957 1.2316 DIN EN ISO 4957 1.2344 DIN EN ISO 4957 1.2379 GB/T 1299 4Cr5MoSiV1 EN ISO 683-17 100Cr6 GOST 5950 4H5MFS1 GB/T 1299 3Cr2W8V GB/T 1299 4Cr5MoSiV AISI 52100 IS 1570 (Part 6) 103T3 IS 3748 103T3
Match Breakdown
CHEMISTRY MATCH
59.5%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 5950 9HF GOST 5950 4H5MFS
Standard GOST 5950-2000 GOST 5950-2000
Category Tool & Die Steels Tool & Die Steels
C (%) 0.85-0.95 0.35-0.45
Cr (%) 0.9-1.2 4.5-5.5
V (%) 0.15-0.3 0.3-0.6
Mn (%) 0.3-0.6 Not specified
Si (%) 0.15-0.35 0.8-1.2
Mo (%) Not specified 1.2-1.6
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 5950 9HF GOST 5950 4H5MFS
Tensile Strength 900-1100 MPa 1350-1650 MPa
Yield Strength 700 MPa min 1150 MPa min
Elongation 8% min 9% min
Hardness 60-64 HRC 44-50 HRC
Typical Applications
GOST 5950 9HF
Used for dies, punches, reamers, gauges, and woodworking cutters.
GOST 5950 4H5MFS
Used for die casting dies, forging tools, extrusion dies, punches, and hot shear blades.
Key Differences
Can GOST 5950 9HF Be Substituted With GOST 5950 4H5MFS?
GOST 5950 9HF and GOST 5950 4H5MFS share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 5950 9HF
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–3500 mm (98.43–137.8 in)
GOST 5950 4H5MFS
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
GOST 5950 9HF
2 active listings and RFQs →
GOST 5950 4H5MFS
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 5950 9HF and GOST 5950 4H5MFS?
GOST 5950 9HF specifies Mn which is not specified for GOST 5950 4H5MFS. GOST 5950 4H5MFS specifies Mo which is not specified for GOST 5950 9HF.
Can GOST 5950 9HF be substituted with GOST 5950 4H5MFS?
GOST 5950 9HF and GOST 5950 4H5MFS share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.