Post Stock Login Register

IS 11169 (Part 1) 30Ni13Cr5 vs IS 11169 (Part 1) 30Ni13Cr5

Strong Match — 96.8% match based on chemical composition and mechanical property overlap.

IS 11169 (Part 1) 30Ni13Cr5 (IS 11169 (Part 1):1984) and IS 11169 (Part 1) 30Ni13Cr5 (IS 11169 (Part 1):2022) are both steel grades. Both fall under the Alloy Steel category. IS 11169 (Part 1) 30Ni13Cr5 is typically used for heavy shafts, axles, connecting rods, large gears, structural components in mining and construction equipment., while IS 11169 (Part 1) 30Ni13Cr5 is commonly used for cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, annex c). IS 11169 (Part 1) 30Ni13Cr5 is defined under Bureau of Indian Standards (IS), originating from India, while IS 11169 (Part 1) 30Ni13Cr5 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 11169 (Part 1) 30Ni13Cr5 vs IS 11169 (Part 1) 30Ni13Cr5 is a 95.2% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 96.8%.

Frequently Compared With IS 11169 (Part 1) 30Ni13Cr5:
UNI 11234 100Cr6 GOST 4543 12HN3A NF A35-565 100C6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6 IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
95.2%
MECHANICAL MATCH
100%
OVERALL
96.8%
Specifications
Property IS 11169 (Part 1) 30Ni13Cr5 IS 11169 (Part 1) 30Ni13Cr5
Standard IS 11169 (Part 1):1984 IS 11169 (Part 1):2022
Category Alloy Steel Alloy Steel
C (%) 0.26-0.34 0.26-0.34
Mn (%) 0.40-0.70 0.40-0.70
Si (%) 0.10-0.35 0.10-0.35
Ni (%) 3.90-4.30 3.90-4.30
Cr (%) 1.10-1.40 1.10-1.45
Cu (%) Not specified <=0.15
Mo (%) Not specified <=0.05
P (%) Not specified <=0.035
S (%) Not specified <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 11169 (Part 1) 30Ni13Cr5 IS 11169 (Part 1) 30Ni13Cr5
Hardness, annealed <=200 HB Not specified
Hardness, annealed (+AC) Not specified <=200 HBW
Typical Applications
IS 11169 (Part 1) 30Ni13Cr5
Heavy shafts, axles, connecting rods, large gears, structural components in mining and construction equipment.
IS 11169 (Part 1) 30Ni13Cr5
Cold heading and cold extrusion of parts that are quenched and tempered; the standard covers bars, wire rods and wires of 2 to 100 mm (clause 1.1, Annex C)
Key Differences
Can IS 11169 (Part 1) 30Ni13Cr5 Be Substituted With IS 11169 (Part 1) 30Ni13Cr5?
IS 11169 (Part 1) 30Ni13Cr5 and IS 11169 (Part 1) 30Ni13Cr5 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 30Ni13Cr5 is often considered as a substitute for IS 11169 (Part 1) 30Ni13Cr5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 11169 (Part 1) 30Ni13Cr5
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4800–5900 mm (188.98–232.28 in)
IS 11169 (Part 1) 30Ni13Cr5
No active listings currently.
On M-EX Right Now
IS 11169 (Part 1) 30Ni13Cr5
2 active listings and RFQs →
IS 11169 (Part 1) 30Ni13Cr5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 11169 (Part 1) 30Ni13Cr5 and IS 11169 (Part 1) 30Ni13Cr5?
IS 11169 (Part 1) 30Ni13Cr5 specifies Cu, Mo, P, S which are not specified for IS 11169 (Part 1) 30Ni13Cr5.
Can IS 11169 (Part 1) 30Ni13Cr5 be substituted with IS 11169 (Part 1) 30Ni13Cr5?
IS 11169 (Part 1) 30Ni13Cr5 and IS 11169 (Part 1) 30Ni13Cr5 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 30Ni13Cr5 is often considered as a substitute for IS 11169 (Part 1) 30Ni13Cr5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.