IS 1570 (Part 2/Sec 1):1979 15C8 Steel: Specifications & Listings

IS 1570 (Part 2/Sec 1):1979 15C8: Unalloyed carbon steel designated 15C8 in IS 1570 (Part 2/Sec 1):1979, with carbon 0.10-0.20% and manganese 0.60-0.90%. Old designation C15Mn75. The standard was reaffirmed in 2004.

Category: Carbon Steel
Grade Details
GradeIS 1570 (Part 2/Sec 1):1979 15C8
Standard IS 1570 (Part 2/Sec 1):1979
ApplicationsBoiler billets, bars and sections, welded round link chains, billets and bars for forgings, carbon steel forgings and case hardened parts (the standard links this grade to IS 2100, IS 6967, IS 1875, IS 2004, IS 4432)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
IS 1875 Class 1A IS 1875:1992 India No activity yet
IS 11169 (Part 1) 15C8 IS 11169 (Part 1):2022 India No activity yet
SAE J403 1016 SAE J403:2001 USA No activity yet
SAE J403 1018 SAE J403:2001 USA No activity yet
SAE J403 1019 SAE J403:2001 USA No activity yet
SAE J403 1021 SAE J403:2001 USA No activity yet
BS 970 (Part 1) 080A15 BS 970 (Part 1):1983 UK No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 11169 (Part 1) 15C8 IS 11169 (Part 1):1984 Strong Match
SAE J403 1016 SAE J403:2014 Strong Match
SAE J403 1018 SAE J403:2014 Strong Match
BS 970 (Part 1) 080M15 BS 970 (Part 1):1983 Strong Match
SAE J403 1016 SAE J403:2001 Strong Match
SAE J403 1018 SAE J403:2001 Strong Match
SAE J403 1016 SAE J403:2009 Strong Match
SAE J403 1018 SAE J403:2009 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn
0.10-0.20 0.60-0.90
Mechanical Properties
Tensile Strength 420-500 MPa
Elongation >=25%

More data from IS 1570 (Part 2/Sec 1):1979

From the standard
Cold-drawn bars, tensile by size 4 size ranges
Size (mm)Tensile strength, min (MPa)Elongation, min (%)
Up to 2054011
Over 20 to 4051013
Over 40 to 6347015
Over 6343018
Source: IS 1570 (Part 2/Sec 1):1979, Edition 2.1 (Amendment 1, December 1989), Table 3
Core properties after case hardening refined and quenched
Tensile strength, min (MPa)Elongation, min (%)Izod impact, min (J)Limiting ruling section (mm)
500175530
Properties in the core of case-hardened parts after refining and quenching. Impact value applies when specified.
Source: IS 1570 (Part 2/Sec 1):1979, Edition 2.1 (Amendment 1, December 1989), Table 5
Tubes, cold drawn 2 conditions
ConditionTensile strength, min (MPa)Yield stress, min (MPa)
Cold drawn and annealed320170
Cold drawn, or cold drawn and tempered44038
Elongation, min: 950 divided by the actual tensile strength in kgf/mm² on a gauge length of 5.65 times the square root of the cross-section, or 1100 divided by it on 4 times the square root. Table 8 of the standard prints this yield stress as 38 under MPa; it appears to be in kgf/mm², about 373 MPa.
Source: IS 1570 (Part 2/Sec 1):1979, Edition 2.1 (Amendment 1, December 1989), Table 8

Active IS 1570 (Part 2/Sec 1):1979 15C8 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 1570 (Part 2/Sec 1):1979 15C8 listings at this time.

Register for Alerts

Buyer RFQs for IS 1570 (Part 2/Sec 1):1979 15C8

+ Post an RFQ for this grade

No open buyer requirements for IS 1570 (Part 2/Sec 1):1979 15C8 at this time.

Register for Alerts