Post Stock Login Register

IS 1570 (Part 2/Sec 1) 2C2 vs EN 10025-2 E295

Related Material — 65% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 2/Sec 1) 2C2 (IS 1570 (Part 2/Sec 1):1979) and EN 10025-2 E295 (EN 10025-2:2019) are both steel grades. IS 1570 (Part 2/Sec 1) 2C2 is classified under Carbon Steel, while EN 10025-2 E295 is classified under Structural Steel — a different category, which is worth noting alongside the chemistry match below. IS 1570 (Part 2/Sec 1) 2C2 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10025-2 E295 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 2/Sec 1) 2C2 vs EN 10025-2 E295 is a 92.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With IS 1570 (Part 2/Sec 1) 2C2:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
92.3%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property IS 1570 (Part 2/Sec 1) 2C2 EN 10025-2 E295
Standard IS 1570 (Part 2/Sec 1):1979 EN 10025-2:2019
Category Carbon Steel Structural Steel
C (%) <=0.05 Not specified
Mn (%) <=0.40 Not specified
P (%) Not specified <=0.045
S (%) Not specified <=0.045
N (%) Not specified <=0.012
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 2/Sec 1) 2C2 EN 10025-2 E295
Tensile Strength Not specified 470-610 MPa
Yield Strength Not specified >=295 MPa
Elongation Not specified >=20%
Condition Not specified Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces
Typical Applications
IS 1570 (Part 2/Sec 1) 2C2
Not documented
EN 10025-2 E295
Hot rolled products of structural steels
Key Differences
Can IS 1570 (Part 2/Sec 1) 2C2 Be Substituted With EN 10025-2 E295?
IS 1570 (Part 2/Sec 1) 2C2 and EN 10025-2 E295 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 2/Sec 1) 2C2
0 active listings and RFQs →
EN 10025-2 E295
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 2/Sec 1) 2C2 and EN 10025-2 E295?
Different category: IS 1570 (Part 2/Sec 1) 2C2 is Carbon Steel, EN 10025-2 E295 is Structural Steel. IS 1570 (Part 2/Sec 1) 2C2 specifies C, Mn which are not specified for EN 10025-2 E295. EN 10025-2 E295 specifies P, S, N which are not specified for IS 1570 (Part 2/Sec 1) 2C2.
Can IS 1570 (Part 2/Sec 1) 2C2 be substituted with EN 10025-2 E295?
IS 1570 (Part 2/Sec 1) 2C2 and EN 10025-2 E295 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.