Post Stock Login Register

IS 1570 (Part 3) 40C15S12 vs BS 970 (Part 3) 226M44

Strong Match — 88.2% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 3) 40C15S12 (IS 1570 (Part 3):1979) and BS 970 (Part 3) 226M44 (BS 970 (Part 3):1991) are both steel grades. Both fall under the Free Machining Steel category. IS 1570 (Part 3) 40C15S12 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 3) 226M44 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 1570 (Part 3) 40C15S12 vs BS 970 (Part 3) 226M44 is a 88.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.2%.

Frequently Compared With IS 1570 (Part 3) 40C15S12:
IS 1570 (Part 3) 10C8S10 IS 4432 10C8S10 SAE J403 1126 SAE J403 1126 SAE J403 1117 SAE J403 1126 SAE J403 1141 SAE J403 1141 SAE J403 1117 SAE J403 1117 SAE J403 1141 SAE J403 1118
Match Breakdown
CHEMISTRY MATCH
88.2%
MECHANICAL MATCH
No shared data
OVERALL
88.2%
Specifications
Property IS 1570 (Part 3) 40C15S12 BS 970 (Part 3) 226M44
Standard IS 1570 (Part 3):1979 BS 970 (Part 3):1991
Category Free Machining Steel Free Machining Steel
C (%) 0.35-0.45 0.40-0.48
Si (%) <=0.25 <=0.25
Mn (%) 1.30-1.70 1.30-1.70
P (%) <=0.060 <=0.06
S (%) 0.08-0.15 0.22-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 3) 40C15S12 BS 970 (Part 3) 226M44
Tensile Strength 600-700 MPa Not specified
Elongation >=15% Not specified
Condition Hot rolled or normalized bars, billets and forgings (Table 2), ruling sections up to 150 mm Not specified
Typical Applications
IS 1570 (Part 3) 40C15S12
Not documented
BS 970 (Part 3) 226M44
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; free-cutting steel (Table 12)
Can IS 1570 (Part 3) 40C15S12 Be Substituted With BS 970 (Part 3) 226M44?
IS 1570 (Part 3) 40C15S12 and BS 970 (Part 3) 226M44 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 226M44 is often considered as a substitute for IS 1570 (Part 3) 40C15S12 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 1570 (Part 3) 40C15S12
0 active listings and RFQs →
BS 970 (Part 3) 226M44
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 3) 40C15S12 and BS 970 (Part 3) 226M44?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 3) 40C15S12 be substituted with BS 970 (Part 3) 226M44?
IS 1570 (Part 3) 40C15S12 and BS 970 (Part 3) 226M44 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 226M44 is often considered as a substitute for IS 1570 (Part 3) 40C15S12 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.