Post Stock Login Register

IS 1570 (Part 5) X10Cr17Mn6Ni4 vs EN 10088-1 X12CrMnNiN17-7-5

Strong Match — 88.2% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 5) X10Cr17Mn6Ni4 (IS 1570 (Part 5):1985) and EN 10088-1 X12CrMnNiN17-7-5 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 5) X10Cr17Mn6Ni4 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X12CrMnNiN17-7-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 5) X10Cr17Mn6Ni4 vs EN 10088-1 X12CrMnNiN17-7-5 is a 88.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.2%.

Frequently Compared With IS 1570 (Part 5) X10Cr17Mn6Ni4:
ASTM A959 201 GOST 5632 12Kh13 EN 10088-1 1.4845 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4401 ASTM A959 202 GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
88.2%
MECHANICAL MATCH
No shared data
OVERALL
88.2%
Specifications
Property IS 1570 (Part 5) X10Cr17Mn6Ni4 EN 10088-1 X12CrMnNiN17-7-5
Standard IS 1570 (Part 5):1985 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.20 <=0.15
Si (%) <=1.0 <=1.00
Mn (%) 4.0-8.0 5.5-7.5
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Cr (%) 16.0-18.0 16.0-18.0
Ni (%) 3.5-5.5 3.5-5.5
N (%) Not specified 0.05-0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 5) X10Cr17Mn6Ni4 EN 10088-1 X12CrMnNiN17-7-5
Tensile Strength >=515 MPa Not specified
Yield Strength >=275 MPa (0.2 % proof stress) Not specified
Elongation >=40% (50 mm) Not specified
Hardness <=217 HB Not specified
Condition Annealed, quenched or solution treated bars and flats (Table 3) Not specified
Key Differences
Can IS 1570 (Part 5) X10Cr17Mn6Ni4 Be Substituted With EN 10088-1 X12CrMnNiN17-7-5?
IS 1570 (Part 5) X10Cr17Mn6Ni4 and EN 10088-1 X12CrMnNiN17-7-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrMnNiN17-7-5 is often considered as a substitute for IS 1570 (Part 5) X10Cr17Mn6Ni4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 1570 (Part 5) X10Cr17Mn6Ni4
0 active listings and RFQs →
EN 10088-1 X12CrMnNiN17-7-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 5) X10Cr17Mn6Ni4 and EN 10088-1 X12CrMnNiN17-7-5?
EN 10088-1 X12CrMnNiN17-7-5 specifies N which is not specified for IS 1570 (Part 5) X10Cr17Mn6Ni4.
Can IS 1570 (Part 5) X10Cr17Mn6Ni4 be substituted with EN 10088-1 X12CrMnNiN17-7-5?
IS 1570 (Part 5) X10Cr17Mn6Ni4 and EN 10088-1 X12CrMnNiN17-7-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrMnNiN17-7-5 is often considered as a substitute for IS 1570 (Part 5) X10Cr17Mn6Ni4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.