Post Stock Login Register

IS 1570 (Part 5) X30Cr13 vs BS 970 (Part 1) 420S29

Close Alternative — 84.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 5) X30Cr13 (IS 1570 (Part 5):1985) and BS 970 (Part 1) 420S29 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 5) X30Cr13 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 420S29 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 1570 (Part 5) X30Cr13 vs BS 970 (Part 1) 420S29 is a 88.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.9%.

Frequently Compared With IS 1570 (Part 5) X30Cr13:
IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 GOST 5632 08X18H10 EN 10088-1 1.4401 GOST 5632 12Kh13 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- EN 10088-1 1.4845
Match Breakdown
CHEMISTRY MATCH
88.3%
MECHANICAL MATCH
No shared data
OVERALL
84.9%
Specifications
Property IS 1570 (Part 5) X30Cr13 BS 970 (Part 1) 420S29
Standard IS 1570 (Part 5):1985 BS 970 (Part 1):1983
Category Stainless Steel Stainless Steel
C (%) 0.26-0.35 0.14-0.20
Si (%) <=1.0 <=1.0
Mn (%) <=1.0 <=1.0
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Cr (%) 12.0-14.0 11.5-13.5
Ni (%) <=1.0 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 5) X30Cr13 BS 970 (Part 1) 420S29
Hardness <=241 HB Not specified
Condition Annealed, quenched or solution treated plates, sheets and strips (Table 2) Not specified
Typical Applications
IS 1570 (Part 5) X30Cr13
Not documented
BS 970 (Part 1) 420S29
Stainless and heat resisting steel for mechanical and allied engineering purposes (Table 13).
Can IS 1570 (Part 5) X30Cr13 Be Substituted With BS 970 (Part 1) 420S29?
IS 1570 (Part 5) X30Cr13 and BS 970 (Part 1) 420S29 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 1570 (Part 5) X30Cr13
0 active listings and RFQs →
BS 970 (Part 1) 420S29
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 5) X30Cr13 and BS 970 (Part 1) 420S29?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 5) X30Cr13 be substituted with BS 970 (Part 1) 420S29?
IS 1570 (Part 5) X30Cr13 and BS 970 (Part 1) 420S29 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.