Post Stock Login Register

IS 1570 (Part 6) T110Mn4W6Cr4 vs GB/T 1299 9CrWMn

Close Alternative — 72.7% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T110Mn4W6Cr4 (IS 1570 (Part 6):1996) and GB/T 1299 9CrWMn (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T110Mn4W6Cr4 is defined under Bureau of Indian Standards (IS), originating from India, while GB/T 1299 9CrWMn is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, IS 1570 (Part 6) T110Mn4W6Cr4 vs GB/T 1299 9CrWMn is a 72.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.7%.

Frequently Compared With IS 1570 (Part 6) T110Mn4W6Cr4:
EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 EN ISO 683-17 100Cr6 IS 1570 (Part 6) 103T3 GOST 5950 3H2W8F DIN EN ISO 4957 1.2344 IS 1570 (Part 6) 118T3 GB/T 1299 3Cr2W8V IS 1570 (Part 6) 133T3 GB/T 1299 4Cr5MoSiV GB/T 1299 4Cr5MoSiV1 IS 3748 103T3
Match Breakdown
CHEMISTRY MATCH
72.7%
MECHANICAL MATCH
No shared data
OVERALL
72.7%
Specifications
Property IS 1570 (Part 6) T110Mn4W6Cr4 GB/T 1299 9CrWMn
Standard IS 1570 (Part 6):1996 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 1.00-1.20 0.85-0.95
Si (%) 0.10-0.35 0.10-0.40
Mn (%) 0.90-1.30 0.90-1.20
Cr (%) 0.90-1.30 0.50-0.80
W (%) 1.25-1.75 0.50-0.80
P (%) <=0.035 0.030 max
S (%) <=0.035 0.030 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) T110Mn4W6Cr4 GB/T 1299 9CrWMn
Tensile Strength Not specified 850-1050 MPa
Yield Strength Not specified 650-850 MPa
Elongation Not specified 8-12%
Hardness Not specified 58-64 HRC
Typical Applications
IS 1570 (Part 6) T110Mn4W6Cr4
Not documented
GB/T 1299 9CrWMn
Used for gauges, reamers, punches, dies, measuring tools, and cold cutting blades.
Can IS 1570 (Part 6) T110Mn4W6Cr4 Be Substituted With GB/T 1299 9CrWMn?
IS 1570 (Part 6) T110Mn4W6Cr4 and GB/T 1299 9CrWMn are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
IS 1570 (Part 6) T110Mn4W6Cr4
No active listings currently.
GB/T 1299 9CrWMn
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2600–3000 mm (102.36–118.11 in)
On M-EX Right Now
IS 1570 (Part 6) T110Mn4W6Cr4
0 active listings and RFQs →
GB/T 1299 9CrWMn
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T110Mn4W6Cr4 and GB/T 1299 9CrWMn?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 6) T110Mn4W6Cr4 be substituted with GB/T 1299 9CrWMn?
IS 1570 (Part 6) T110Mn4W6Cr4 and GB/T 1299 9CrWMn are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.