Post Stock Login Register

IS 1570 (Part 6) T110Mn4W6Cr4 vs IS 3748 118T3

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T110Mn4W6Cr4 (IS 1570 (Part 6):1996) and IS 3748 118T3 (IS 3748:1990) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T110Mn4W6Cr4 is defined under Bureau of Indian Standards (IS), originating from India, while IS 3748 118T3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) T110Mn4W6Cr4 vs IS 3748 118T3 is a 72.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 1570 (Part 6) T110Mn4W6Cr4:
EN ISO 4957 1.2316 DIN EN ISO 4957 1.2379 EN ISO 683-17 100Cr6 GB/T 1299 3Cr2W8V DIN EN ISO 4957 1.2344 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3 GOST 5950 3H2W8F IS 1570 (Part 6) 133T3 GB/T 1299 4Cr5MoSiV GB/T 1299 4Cr5MoSiV1 IS 3748 103T3
Match Breakdown
CHEMISTRY MATCH
72.4%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 1570 (Part 6) T110Mn4W6Cr4 IS 3748 118T3
Standard IS 1570 (Part 6):1996 IS 3748:1990
Category Tool & Die Steels Tool & Die Steels
C (%) 1.00-1.20 1.10-1.25
Si (%) 0.10-0.35 0.10-0.30
Mn (%) 0.90-1.30 <=0.40
Cr (%) 0.90-1.30 Not specified
W (%) 1.25-1.75 Not specified
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) T110Mn4W6Cr4 IS 3748 118T3
Hardness Not specified <=220 HB
Condition Not specified Annealed (maximum Brinell hardness)
Typical Applications
IS 1570 (Part 6) T110Mn4W6Cr4
Not documented
IS 3748 118T3
Cold work tools and dies for blanking, trimming, chipping and shearing
Key Differences
Can IS 1570 (Part 6) T110Mn4W6Cr4 Be Substituted With IS 3748 118T3?
IS 1570 (Part 6) T110Mn4W6Cr4 and IS 3748 118T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 6) T110Mn4W6Cr4
0 active listings and RFQs →
IS 3748 118T3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T110Mn4W6Cr4 and IS 3748 118T3?
IS 1570 (Part 6) T110Mn4W6Cr4 specifies Cr, W which are not specified for IS 3748 118T3.
Can IS 1570 (Part 6) T110Mn4W6Cr4 be substituted with IS 3748 118T3?
IS 1570 (Part 6) T110Mn4W6Cr4 and IS 3748 118T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.