Post Stock Login Register

IS 1570 (Part 6) XT215Cr12 vs EN ISO 4957 X210Cr12

Strong Match — 86.4% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) XT215Cr12 (IS 1570 (Part 6):1996) and EN ISO 4957 X210Cr12 (EN ISO 4957:2018) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) XT215Cr12 is defined under Bureau of Indian Standards (IS), originating from India, while EN ISO 4957 X210Cr12 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 6) XT215Cr12 vs EN ISO 4957 X210Cr12 is a 86.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.4%.

Frequently Compared With IS 1570 (Part 6) XT215Cr12:
EN ISO 683-17 100Cr6 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV1 EN ISO 4957 1.2316 GB/T 1299 4Cr5MoSiV AISI 52100 DIN EN ISO 4957 1.2379 IS 1570 (Part 6) 133T3 GB/T 1299 3Cr2W8V GOST 5950 3H2W8F IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 118T3
Match Breakdown
CHEMISTRY MATCH
86.4%
MECHANICAL MATCH
No shared data
OVERALL
86.4%
Specifications
Property IS 1570 (Part 6) XT215Cr12 EN ISO 4957 X210Cr12
Standard IS 1570 (Part 6):1996 EN ISO 4957:2018
Category Tool & Die Steels Tool & Die Steels
C (%) 2.00-2.30 2.00–2.35
Si (%) 0.10-0.35 ≤0.40
Mn (%) 0.25-0.50 ≤0.40
Cr (%) 11.0-13.0 11.00–13.00
Mo (%) <=0.80 (optional) Not specified
V (%) <=0.80 (optional) Not specified
P (%) <=0.035 Not specified
S (%) <=0.035 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) XT215Cr12 EN ISO 4957 X210Cr12
Hardness HRC (hardened) Not specified 58–64
Hardness HB (annealed) Not specified ≤255
Typical Applications
IS 1570 (Part 6) XT215Cr12
Not documented
EN ISO 4957 X210Cr12
Blanking dies, thread rolling dies, gauges
Key Differences
Can IS 1570 (Part 6) XT215Cr12 Be Substituted With EN ISO 4957 X210Cr12?
IS 1570 (Part 6) XT215Cr12 and EN ISO 4957 X210Cr12 overlap closely enough on chemistry and mechanical properties that EN ISO 4957 X210Cr12 is often considered as a substitute for IS 1570 (Part 6) XT215Cr12 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 1570 (Part 6) XT215Cr12
No active listings currently.
EN ISO 4957 X210Cr12
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 3000–3700 mm (118.11–145.67 in)
On M-EX Right Now
IS 1570 (Part 6) XT215Cr12
0 active listings and RFQs →
EN ISO 4957 X210Cr12
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) XT215Cr12 and EN ISO 4957 X210Cr12?
IS 1570 (Part 6) XT215Cr12 specifies Mo, V, P, S which are not specified for EN ISO 4957 X210Cr12.
Can IS 1570 (Part 6) XT215Cr12 be substituted with EN ISO 4957 X210Cr12?
IS 1570 (Part 6) XT215Cr12 and EN ISO 4957 X210Cr12 overlap closely enough on chemistry and mechanical properties that EN ISO 4957 X210Cr12 is often considered as a substitute for IS 1570 (Part 6) XT215Cr12 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.