Post Stock Login Register

IS 1570 (Part 6) XT215Cr12 vs GOST 5950 H12F1

Close Alternative — 83.1% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) XT215Cr12 (IS 1570 (Part 6):1996) and GOST 5950 H12F1 (GOST 5950-2000) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) XT215Cr12 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, IS 1570 (Part 6) XT215Cr12 vs GOST 5950 H12F1 is a 83.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 83.1%.

Frequently Compared With IS 1570 (Part 6) XT215Cr12:
EN ISO 683-17 100Cr6 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2344 EN ISO 4957 1.2316 GB/T 1299 4Cr5MoSiV GOST 5950 3H2W8F AISI 52100 DIN EN ISO 4957 1.2379 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 133T3 GB/T 1299 3Cr2W8V IS 1570 (Part 6) 118T3
Match Breakdown
CHEMISTRY MATCH
83.1%
MECHANICAL MATCH
No shared data
OVERALL
83.1%
Specifications
Property IS 1570 (Part 6) XT215Cr12 GOST 5950 H12F1
Standard IS 1570 (Part 6):1996 GOST 5950-2000
Category Tool & Die Steels Tool & Die Steels
C (%) 2.00-2.30 1.9-2.2
Si (%) 0.10-0.35 0.2-0.6
Mn (%) 0.25-0.50 0.2-0.6
Cr (%) 11.0-13.0 11-13
Mo (%) <=0.80 (optional) Not specified
V (%) <=0.80 (optional) 0.7-1.0
P (%) <=0.035 Not specified
S (%) <=0.035 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 6) XT215Cr12 GOST 5950 H12F1
Tensile Strength Not specified 1050-1250 MPa
Yield Strength Not specified 850 MPa min
Elongation Not specified 5% min
Hardness Not specified 61-65 HRC
Typical Applications
IS 1570 (Part 6) XT215Cr12
Not documented
GOST 5950 H12F1
Used for blanking dies, punches, forming dies, cutters, and rolling tools.
Key Differences
Can IS 1570 (Part 6) XT215Cr12 Be Substituted With GOST 5950 H12F1?
IS 1570 (Part 6) XT215Cr12 and GOST 5950 H12F1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
IS 1570 (Part 6) XT215Cr12
No active listings currently.
GOST 5950 H12F1
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 3600–4200 mm (141.73–165.35 in)
On M-EX Right Now
IS 1570 (Part 6) XT215Cr12
0 active listings and RFQs →
GOST 5950 H12F1
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) XT215Cr12 and GOST 5950 H12F1?
IS 1570 (Part 6) XT215Cr12 specifies Mo, P, S which are not specified for GOST 5950 H12F1.
Can IS 1570 (Part 6) XT215Cr12 be substituted with GOST 5950 H12F1?
IS 1570 (Part 6) XT215Cr12 and GOST 5950 H12F1 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.