Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Si
Mn
P
S
Cr
Ni
Mo
V
Cu
0.20-0.30
0.20-0.50
0.30-0.60
<=0.030
<=0.030
1.5-1.80
<=0.40
0.60-0.80
0.20-0.30
<=0.30
Mechanical Properties
Tensile Strength
700-850 MPa
Yield Strength
>=550 MPa (0.2 % proof stress)
Elongation
>=17%
Condition
Bars, forgings, Q+T, thickness - (first row of Table 3)
More data from IS 1570 (Part 7):1992
From the standard
Mechanical properties at room temperature2 rows
Product
Heat treatment
Thickness (mm)
Hardness (RB)
Rp0.2 min (MPa)
Rm min (MPa)
Rm max (MPa)
Elongation min (%)
KV (J)
Bend test D max
Bars, forgings
Q+T
-
-
550
700
850
17
-
-
Bars, forgings
N+T
up to 600
220
450
650
-
16
-
-
Rm and elongation printed once for a group of thickness rows are repeated on each row; Rp0.2 'Note 8' is printed as in the standard; in case of dispute the tensile strength value is deciding.
Source: IS 1570 (Part 7):1992, Table 3
0.2 % proof stress at elevated temperature (guidance only)Rp0.2 min in MPa
Product, heat treatment, thickness
200 deg C
250 deg C
300 deg C
350 deg C
400 deg C
450 deg C
500 deg C
Bars, forgings, N+T, up to 100 mm
500
480
460
440
410
380
350
For guidance only.
Source: IS 1570 (Part 7):1992, Table 4
Heat treatment6 entries
Normalising temperature (N+T)
970 to 990 deg C
Normalising cooling
quiet air
Tempering temperature
680 to 700 deg C
Quenching temperature
870 to 900 deg C
Quenching medium
oil
Tempering temperature after quenching
600 to 700 deg C, min 2 h
Indications are for guidance only except where test samples are reference heat treated; stress relief temperature should be at least 30 deg C below the tempering temperature.
Source: IS 1570 (Part 7):1992, Table 5
Active IS 1570 (Part 7):1992 20Cr2MoVH Listings on M-EX (For Sale)