Strong Match — 93.8% match
based on chemical composition and mechanical property overlap.
IS 1570 C30 (IS 1570:1961) and BS 970 (Part 3) 080M30 (BS 970 (Part 3):1991) are both steel grades.
Both fall under the Carbon Steel category.
IS 1570 C30 is typically used for axles, shafts, gears, connecting rods, machine parts, forgings, while BS 970 (Part 3) 080M30 is commonly used for used for shafts, gears, axles, couplings, bolts, and general engineering components..
IS 1570 C30 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 3) 080M30 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, IS 1570 C30 vs BS 970 (Part 3) 080M30 is a 93.8% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 93.8%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Used for shafts, gears, axles, couplings, bolts, and general engineering components.
Can IS 1570 C30 Be Substituted With BS 970 (Part 3) 080M30?
IS 1570 C30 and BS 970 (Part 3) 080M30 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 080M30 is often considered as a substitute for IS 1570 C30 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 1570 C30 and BS 970 (Part 3) 080M30?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 C30 be substituted with BS 970 (Part 3) 080M30?
IS 1570 C30 and BS 970 (Part 3) 080M30 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 080M30 is often considered as a substitute for IS 1570 C30 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.