Post Stock Login Register

IS 2062 E165 vs AS/NZS 3679.1 300

Related Material — 61.1% match based on chemical composition and mechanical property overlap.

IS 2062 E165 (IS 2062:2006) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. IS 2062 E165 is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. IS 2062 E165 is defined under Bureau of Indian Standards (IS), originating from India, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, IS 2062 E165 vs AS/NZS 3679.1 300 is a 91.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61.1%.

Frequently Compared With IS 2062 E165:
IS 2062 E250A IS 2062 E250B IS 2062 E250A IS 2062 E250BR CSA G40.21 260W CSA G40.21 400A IS 2062 E250B0 GOST 19281 09G2S CSA G40.21 300W IS 2062 E250A AS/NZS 3679.1 350 CSA G40.21 350W
Match Breakdown
CHEMISTRY MATCH
91.7%
MECHANICAL MATCH
0%
OVERALL
61.1%
Specifications
Property IS 2062 E165 AS/NZS 3679.1 300
Standard IS 2062:2006 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) <=0.25 <=0.22
Mn (%) <=1.25 <=1.70
S (%) <=0.045 <=0.040
P (%) <=0.045 <=0.040
Si (%) Not specified <=0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E165 AS/NZS 3679.1 300
Tensile Strength >=290 MPa 440-600 MPa
Yield Strength 165 MPa (all thicknesses) 300 MPa min
Elongation >=23% 22% min
Impact not required Not specified
Typical Applications
IS 2062 E165
Structural work: welded, bolted and riveted structures and general engineering purposes
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can IS 2062 E165 Be Substituted With AS/NZS 3679.1 300?
IS 2062 E165 and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 E165
No active listings currently.
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
IS 2062 E165
0 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E165 and AS/NZS 3679.1 300?
AS/NZS 3679.1 300 specifies Si which is not specified for IS 2062 E165.
Can IS 2062 E165 be substituted with AS/NZS 3679.1 300?
IS 2062 E165 and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.