Post Stock Login Register

IS 2062 E250A vs IS 2062 E250BR

Strong Match — 99.8% match based on chemical composition and mechanical property overlap.

IS 2062 E250A (IS 2062:2006) and IS 2062 E250BR (IS 2062:2009) are both steel grades. Both fall under the Structural Steel category. IS 2062 E250A is typically used for structural work: welded, bolted and riveted structures and general engineering purposes, while IS 2062 E250BR is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 E250A is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 E250BR is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 E250A vs IS 2062 E250BR is a 99.6% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 99.8%.

Frequently Compared With IS 2062 E250A:
IS 2062 E165 IS 2062 E250A IS 2062 E250B0 IS 2062 E250B IS 2062 E250B0 IS 2062 E250A IS 2062 E250BR GOST 19281 09G2S AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 350W CSA G40.21 260W
Match Breakdown
CHEMISTRY MATCH
99.6%
MECHANICAL MATCH
100%
OVERALL
99.8%
Specifications
Property IS 2062 E250A IS 2062 E250BR
Standard IS 2062:2006 IS 2062:2009
Category Structural Steel Structural Steel
C (%) <=0.23 <=0.22
Mn (%) <=1.50 <=1.50
S (%) <=0.045 <=0.045
P (%) <=0.045 <=0.045
Si (%) <=0.40 <=0.40
CEV (%) <=0.42 <=0.41
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E250A IS 2062 E250BR
Tensile Strength >=410 MPa >=410 MPa
Yield Strength 250 MPa (<20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm) 250 MPa (<20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23% >=23%
Impact not required Not specified
Impact Energy Not specified >=27 J at room temperature (25 +/- 2°C) (optional)
Typical Applications
IS 2062 E250A
Structural work: welded, bolted and riveted structures and general engineering purposes
IS 2062 E250BR
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 E250A Be Substituted With IS 2062 E250BR?
IS 2062 E250A and IS 2062 E250BR overlap closely enough on chemistry and mechanical properties that IS 2062 E250BR is often considered as a substitute for IS 2062 E250A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 2062 E250A
0 active listings and RFQs →
IS 2062 E250BR
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E250A and IS 2062 E250BR?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 E250A be substituted with IS 2062 E250BR?
IS 2062 E250A and IS 2062 E250BR overlap closely enough on chemistry and mechanical properties that IS 2062 E250BR is often considered as a substitute for IS 2062 E250A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.