Post Stock Login Register

IS 2062:2011 E250A Steel: Specifications & Listings

IS 2062:2011 E250A: E250A is grade E 250, quality A, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress.

Forms: Flat Bar Plate Angle Category: Structural Steel
Grade Details
GradeIS 2062:2011 E250A
Standard IS 2062:2011
Applicationsstructural fabrication, bridges, industrial sheds, machinery frames, general engineering components, plates, welded structures
Most Active InWest (Gujarat, Maharashtra)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
EN 10346 S250GD EN 10346:2015 Europe 2 listings, 0 RFQs →
ASTM A36 ASTM A36 USA 3 listings, 1 RFQ →
JIS G3101 SS400 JIS G3101:2020 Japan 3 listings, 0 RFQs →
GB/T 700 Q235 GB/T 700-2006 China 2 listings, 0 RFQs →
EN 10025-2 S235JR EN 10025-2:2019 Europe 3 listings, 0 RFQs →
CSA G40.21 260W CSA G40.21-13 (R2023) Canada 2 listings, 0 RFQs →
AS/NZS 1594 HA250 AS/NZS 1594:2025 Australia 2 listings, 0 RFQs →
Market Snapshot

Buyers bidding higher

Updated 15 Oct 2026

See Full Price Gap →
7D Offer Price
● 0.0%
15D Offer Price
● 0.0%
30D Offer Price
▲ +0.3%
Supply & Demand by FormSee Full Supply & Demand →
Plate →
Healthy
Angle →
Healthy
Flat Bar →
Deep Supply
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 2062 E250A IS 2062:2006 Strong Match
IS 2062 E250A IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2011 Strong Match
IS 2062 E250BR IS 2062:2011 Strong Match
IS 2062 E250B IS 2062:2006 Strong Match
IS 2062 E250BR IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2009 Strong Match
IS 2062 E250C IS 2062:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn Si S P CEV
<=0.23 <=1.50 <=0.40 <=0.045 <=0.045 <=0.42
Mechanical Properties
Tensile Strength >=410 MPa
Yield Strength 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23%
Impact not required
Typical Available Sizes
Round Bar 12-300 mm dia
Flat Bar 25-400 mm width
Sizes are indicative. Contact seller for exact availability.

More data from IS 2062:2011

From the standard
Yield stress by thickness 3 thickness ranges
Thickness (mm)Yield stress ReH, min (MPa)
Under 20250
20 to 40240
Over 40230
For product thickness or diameter above 100 mm, a lower minimum tensile strength may be agreed between the purchaser and the manufacturer.
Source: IS 2062:2011 with Amendment 1, Table 2
Bend test t is the thickness
Internal bend diameter, maximum, thickness up to 25 mm
2t
Internal bend diameter, maximum, thickness over 25 mm
3t
Amendment 1 changes the heading from Min to Max. t is the thickness of the test piece.
Source: IS 2062:2011 with Amendment 1, Table 2, note 2
Impact test and deoxidation quality A
Impact test
Not required
Mode of deoxidation
Semi-killed or killed
Source: IS 2062:2011 with Amendment 1, Tables 1 and 2, clause 5

Popular forms for this grade:

Plate (6) Angle (6) Flat Bar (3)
Processing:

Active IS 2062:2011 E250A Listings on M-EX (For Sale)

+ Create a Listing for this grade
IS 2062:2011 E250A Angle
5.900 MT
View Listing
IS 2062:2011 E250A Flat Bar
1.700 MT
View Listing
IS 2062:2011 E250A Flat Bar
1.200 MT
View Listing
IS 2062:2011 E250A Plate
3.700 MT
View Listing
IS 2062:2011 E250A Angle
8.700 MT
View Listing
IS 2062:2011 E250A Angle
2.600 MT
View Listing
IS 2062:2011 E250A Plate
3.200 MT
View Listing
IS 2062:2011 E250A Flat Bar
2.100 MT
View Listing
IS 2062:2011 E250A Plate
3.200 MT
View Listing

Buyer RFQs for IS 2062:2011 E250A

+ Post an RFQ for this grade
IS 2062:2011 E250A Plate
16.400 MT
View RFQ
IS 2062:2011 E250A Angle
15.700 MT
View RFQ
IS 2062:2011 E250A Angle
6.400 MT
View RFQ
IS 2062:2011 E250A Plate
11.500 MT
View RFQ
IS 2062:2011 E250A Plate
11.800 MT
View RFQ
IS 2062:2011 E250A Angle
11.500 MT
View RFQ