Post Stock Login Register

IS 2062:2011 E250B0 Steel: Specifications & Listings

IS 2062:2011 E250B0: E250B0 is grade E 250, quality B0, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress.

Forms: Angle Category: Structural Steel
Grade Details
GradeIS 2062:2011 E250B0
Standard IS 2062:2011
Applicationsstructural sections, welded structures, bridges, transmission towers, industrial fabrication, engineering structures
Most Active InWest (Maharashtra)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
EN 10025-2 S275JR EN 10025-2:2019 Europe 0 listings, 3 RFQs →
ASTM A36 ASTM A36 USA 3 listings, 1 RFQ →
JIS G3106 SM400A JIS G3106:2020 Japan 2 listings, 0 RFQs →
EN 10025-2 S235J0 EN 10025-2:2019 Europe 2 listings, 0 RFQs →
JIS G3101 SS400 JIS G3101:2020 Japan 3 listings, 0 RFQs →
Market Snapshot

Sellers asking higher

Updated 15 Oct 2026

See Full Price Gap →
7D Offer Price
● 0.0%
15D Offer Price
● 0.0%
30D Offer Price
▼ -0.6%
Supply & Demand by FormSee Full Supply & Demand →
Angle →
Healthy
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 2062 E250BR IS 2062:2011 Strong Match
IS 2062 E250B IS 2062:2006 Strong Match
IS 2062 E250BR IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2009 Strong Match
IS 2062 E250A IS 2062:2011 Strong Match
IS 2062 E250A IS 2062:2006 Strong Match
IS 2062 E250A IS 2062:2009 Strong Match
IS 2062 E250C IS 2062:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn Si S P CEV
<=0.22 <=1.50 <=0.40 <=0.045 <=0.045 <=0.41
Mechanical Properties
Tensile Strength >=410 MPa
Yield Strength 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23%
Impact Energy >=27 J at 0°C
Typical Available Sizes
Round Bar 12-300 mm dia
Flat Bar 25-400 mm width
Sizes are indicative. Contact seller for exact availability.

More data from IS 2062:2011

From the standard
Yield stress by thickness 3 thickness ranges
Thickness (mm)Yield stress ReH, min (MPa)
Under 20250
20 to 40240
Over 40230
For product thickness or diameter above 100 mm, a lower minimum tensile strength may be agreed between the purchaser and the manufacturer.
Source: IS 2062:2011 with Amendment 1, Table 2
Bend test t is the thickness
Internal bend diameter, maximum, thickness up to 25 mm
2t
Internal bend diameter, maximum, thickness over 25 mm
3t
Amendment 1 changes the heading from Min to Max. t is the thickness of the test piece.
Source: IS 2062:2011 with Amendment 1, Table 2, note 2
Impact test and deoxidation quality B0
Impact test
Mandatory at 0°C
Minimum Charpy impact energy
27 J
Mode of deoxidation
Semi-killed or killed
Source: IS 2062:2011 with Amendment 1, Tables 1 and 2, clause 5

Popular forms for this grade:

Angle (6)

Active IS 2062:2011 E250B0 Listings on M-EX (For Sale)

+ Create a Listing for this grade
IS 2062:2011 E250B0 Angle
4.800 MT
View Listing
IS 2062:2011 E250B0 Angle
5.000 MT
View Listing
IS 2062:2011 E250B0 Angle
2.200 MT
View Listing

Buyer RFQs for IS 2062:2011 E250B0

+ Post an RFQ for this grade
IS 2062:2011 E250B0 Angle
4.700 MT
View RFQ
IS 2062:2011 E250B0 Angle
2.400 MT
View RFQ
IS 2062:2011 E250B0 Angle
2.400 MT
View RFQ