Post Stock Login Register

IS 2062 E250C vs AS/NZS 3679.1 300

Related Material — 64.9% match based on chemical composition and mechanical property overlap.

IS 2062 E250C (IS 2062:2011) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. IS 2062 E250C is typically used for bridges, offshore structures, heavy fabrication, pressure-support structures, industrial structures, crane structures, while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. IS 2062 E250C is defined under Bureau of Indian Standards (IS), originating from India, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, IS 2062 E250C vs AS/NZS 3679.1 300 is a 97.4% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 64.9%.

Frequently Compared With IS 2062 E250C:
IS 2062 E250A IS 2062 E250B0 CSA G40.21 350W CSA G40.21 400A GOST 19281 09G2S CSA G40.21 400W CSA G40.21 260W CSA G40.21 300W IS 2062 E250B AS/NZS 3679.1 350 IS 2062 E250B0 IS 2062 E250BR
Match Breakdown
CHEMISTRY MATCH
97.4%
MECHANICAL MATCH
0%
OVERALL
64.9%
Specifications
Property IS 2062 E250C AS/NZS 3679.1 300
Standard IS 2062:2011 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.22
Mn (%) <=1.50 <=1.70
Si (%) <=0.40 <=0.50
S (%) <=0.040 <=0.040
P (%) <=0.040 <=0.040
CEV (%) <=0.39 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E250C AS/NZS 3679.1 300
Tensile Strength >=410 MPa 440-600 MPa
Yield Strength 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm) 300 MPa min
Elongation >=23% 22% min
Impact Energy >=27 J at -20°C Not specified
Typical Applications
IS 2062 E250C
bridges, offshore structures, heavy fabrication, pressure-support structures, industrial structures, crane structures
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can IS 2062 E250C Be Substituted With AS/NZS 3679.1 300?
IS 2062 E250C and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 E250C
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2800–3100 mm (110.24–122.05 in)
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
IS 2062 E250C
2 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E250C and AS/NZS 3679.1 300?
IS 2062 E250C specifies CEV which is not specified for AS/NZS 3679.1 300.
Can IS 2062 E250C be substituted with AS/NZS 3679.1 300?
IS 2062 E250C and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.