Post Stock Login Register

IS 2062:2011 E250C Steel: Specifications & Listings

IS 2062:2011 E250C: E250C is grade E 250, quality C, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress.

Forms: Plate Category: Structural Steel
Grade Details
GradeIS 2062:2011 E250C
Standard IS 2062:2011
Applicationsbridges, offshore structures, heavy fabrication, pressure-support structures, industrial structures, crane structures
Most Active InWest (Maharashtra)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
EN 10025-2 S235J2 EN 10025-2:2019 Europe 2 listings, 0 RFQs →
ASTM A36 ASTM A36 USA 3 listings, 1 RFQ →
Supply & Demand by FormSee Full Supply & Demand →
Plate →
Low Activity
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
IS 2062 E250C IS 2062:2006 Strong Match
IS 2062 E250C IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2011 Strong Match
IS 2062 E250BR IS 2062:2011 Strong Match
IS 2062 E250B IS 2062:2006 Strong Match
IS 2062 E250BR IS 2062:2009 Strong Match
IS 2062 E250B0 IS 2062:2009 Strong Match
IS 2062 E250A IS 2062:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn Si S P CEV
<=0.20 <=1.50 <=0.40 <=0.040 <=0.040 <=0.39
Mechanical Properties
Tensile Strength >=410 MPa
Yield Strength 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23%
Impact Energy >=27 J at -20°C
Typical Available Sizes
Round Bar 12-300 mm dia
Flat Bar 25-400 mm width
Sizes are indicative. Contact seller for exact availability.

More data from IS 2062:2011

From the standard
Yield stress by thickness 3 thickness ranges
Thickness (mm)Yield stress ReH, min (MPa)
Under 20250
20 to 40240
Over 40230
For product thickness or diameter above 100 mm, a lower minimum tensile strength may be agreed between the purchaser and the manufacturer.
Source: IS 2062:2011 with Amendment 1, Table 2
Bend test t is the thickness
Internal bend diameter, maximum, thickness up to 25 mm
2t
Internal bend diameter, maximum, thickness over 25 mm
3t
Amendment 1 changes the heading from Min to Max. t is the thickness of the test piece.
Source: IS 2062:2011 with Amendment 1, Table 2, note 2
Impact test and deoxidation quality C
Impact test
Mandatory at -20°C
Minimum Charpy impact energy
27 J
Mode of deoxidation
Killed
Source: IS 2062:2011 with Amendment 1, Tables 1 and 2, clause 5

Popular forms for this grade:

Plate (2)

Active IS 2062:2011 E250C Listings on M-EX (For Sale)

+ Create a Listing for this grade
IS 2062:2011 E250C Plate
4.900 MT
View Listing
IS 2062:2011 E250C Plate
10.800 MT
View Listing

Buyer RFQs for IS 2062:2011 E250C

+ Post an RFQ for this grade

No open buyer requirements for IS 2062:2011 E250C at this time.

Register for Alerts