Post Stock Login Register

IS 2062 E350A vs AS/NZS 3679.1 300

Close Alternative — 76.1% match based on chemical composition and mechanical property overlap.

IS 2062 E350A (IS 2062:2011) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. IS 2062 E350A is typically used for heavy structural work, machinery bases, bridges, while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. IS 2062 E350A is defined under Bureau of Indian Standards (IS), originating from India, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, IS 2062 E350A vs AS/NZS 3679.1 300 is a 97.5% match. As per mechanical properties, the match is 33.3%. Combined, this makes them a close alternative overall at 76.1%.

Frequently Compared With IS 2062 E350A:
GOST 19281 09G2S AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 300W CSA G40.21 260W CSA G40.21 480W CSA G40.21 350W IS 2062 E250B0 CSA G40.21 400A ASTM A1008 SS Grade 50 IS 2062 E250A ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
97.5%
MECHANICAL MATCH
33.3%
OVERALL
76.1%
Specifications
Property IS 2062 E350A AS/NZS 3679.1 300
Standard IS 2062:2011 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.22
Mn (%) <=1.55 <=1.70
Si (%) <=0.45 <=0.50
S (%) <=0.045 <=0.040
P (%) <=0.045 <=0.040
CEV (%) <=0.47 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E350A AS/NZS 3679.1 300
Tensile Strength >=490 MPa 440-600 MPa
Yield Strength 350 MPa (<=20mm) / 330 MPa (20-40mm) / 320 MPa (>40mm) 300 MPa min
Elongation >=22% 22% min
Impact not required Not specified
Typical Applications
IS 2062 E350A
Heavy structural work, machinery bases, bridges
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can IS 2062 E350A Be Substituted With AS/NZS 3679.1 300?
IS 2062 E350A and AS/NZS 3679.1 300 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
IS 2062 E350A
Plate → (7 listings)
Thickness: 10–12 mm (0.39–0.47 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3800 mm (98.43–149.61 in)
Angle → (6 listings)
Leg 1: 65–100 mm (2.56–3.94 in)
Leg 2: 65–75 mm (2.56–2.95 in)
Thickness: 5–8 mm (0.2–0.31 in)
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
IS 2062 E350A
13 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E350A and AS/NZS 3679.1 300?
IS 2062 E350A specifies CEV which is not specified for AS/NZS 3679.1 300.
Can IS 2062 E350A be substituted with AS/NZS 3679.1 300?
IS 2062 E350A and AS/NZS 3679.1 300 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.