Post Stock Login Register

IS 2062 E350A vs CSA G40.21 300W

Related Material — 62% match based on chemical composition and mechanical property overlap.

IS 2062 E350A (IS 2062:2011) and CSA G40.21 300W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. IS 2062 E350A is typically used for heavy structural work, machinery bases, bridges, while CSA G40.21 300W is commonly used for structural fabrication,bridges,buildings,machinery frames,general construction,welded structures. IS 2062 E350A is defined under Bureau of Indian Standards (IS), originating from India, while CSA G40.21 300W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, IS 2062 E350A vs CSA G40.21 300W is a 93% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 62%.

Frequently Compared With IS 2062 E350A:
AS/NZS 3679.1 300 GOST 19281 09G2S AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 260W CSA G40.21 480W CSA G40.21 350W IS 2062 E250B0 CSA G40.21 400A ASTM A1008 SS Grade 50 IS 2062 E250A ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
93%
MECHANICAL MATCH
0%
OVERALL
62%
Specifications
Property IS 2062 E350A CSA G40.21 300W
Standard IS 2062:2011 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.23
Mn (%) <=1.55 <=1.50
Si (%) <=0.45 Not specified
S (%) <=0.045 <=0.050
P (%) <=0.045 <=0.040
CEV (%) <=0.47 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E350A CSA G40.21 300W
Tensile Strength >=490 MPa 450-620 MPa
Yield Strength 350 MPa (<=20mm) / 330 MPa (20-40mm) / 320 MPa (>40mm) 300 MPa min
Elongation >=22% 20-23 %
Impact not required Not specified
Typical Applications
IS 2062 E350A
Heavy structural work, machinery bases, bridges
CSA G40.21 300W
structural fabrication,bridges,buildings,machinery frames,general construction,welded structures
Key Differences
Can IS 2062 E350A Be Substituted With CSA G40.21 300W?
IS 2062 E350A and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 E350A
Plate → (7 listings)
Thickness: 10–12 mm (0.39–0.47 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3800 mm (98.43–149.61 in)
Angle → (6 listings)
Leg 1: 65–100 mm (2.56–3.94 in)
Leg 2: 65–75 mm (2.56–2.95 in)
Thickness: 5–8 mm (0.2–0.31 in)
CSA G40.21 300W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2800 mm (106.3–110.24 in)
On M-EX Right Now
IS 2062 E350A
13 active listings and RFQs →
CSA G40.21 300W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E350A and CSA G40.21 300W?
IS 2062 E350A specifies Si, CEV which are not specified for CSA G40.21 300W.
Can IS 2062 E350A be substituted with CSA G40.21 300W?
IS 2062 E350A and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.