Post Stock Login Register

IS 2062 E450A vs AS/NZS Grade 500

Strong Match — 96.1% match based on chemical composition and mechanical property overlap.

IS 2062 E450A (IS 2062:2011) and AS/NZS Grade 500 (AS/NZS 3597:2008) are both steel grades. Both fall under the Structural Steel category. IS 2062 E450A is typically used for heavy construction equipment, bridges, mining equipment, offshore structures, high strength structural fabrication, industrial machinery, while AS/NZS Grade 500 is commonly used for heavy mining equipment, bulldozer blades, wear-resistant structural applications, large crane booms, offshore jackets.. IS 2062 E450A is defined under Bureau of Indian Standards (IS), originating from India, while AS/NZS Grade 500 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, IS 2062 E450A vs AS/NZS Grade 500 is a 96.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 96.1%.

Frequently Compared With IS 2062 E450A:
AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 480W CSA G40.21 260W CSA G40.21 400W AS/NZS 3679.1 300 CSA G40.21 300W CSA G40.21 400A ASTM A1008 SS Grade 50 GOST 19281 09G2S IS 2062 E250B0 ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
96.1%
MECHANICAL MATCH
No shared data
OVERALL
96.1%
Specifications
Property IS 2062 E450A AS/NZS Grade 500
Standard IS 2062:2011 AS/NZS 3597:2008
Category Structural Steel Structural Steel
C (%) <=0.22 max 0.2
Mn (%) <=1.65 max 1.6
Si (%) <=0.45 max 0.55
S (%) <=0.045 max 0.03
P (%) <=0.045 max 0.03
CEV (%) <=0.52 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E450A AS/NZS Grade 500
Tensile Strength >=570 MPa Not specified
Yield Strength 450 MPa (<=20mm) / 430 MPa (20-40mm) / 420 MPa (>40mm) Not specified
Elongation >=20% Not specified
Impact not required Not specified
Typical Applications
IS 2062 E450A
heavy construction equipment, bridges, mining equipment, offshore structures, high strength structural fabrication, industrial machinery
AS/NZS Grade 500
Heavy mining equipment, bulldozer blades, wear-resistant structural applications, large crane booms, offshore jackets.
Key Differences
Can IS 2062 E450A Be Substituted With AS/NZS Grade 500?
IS 2062 E450A and AS/NZS Grade 500 overlap closely enough on chemistry and mechanical properties that AS/NZS Grade 500 is often considered as a substitute for IS 2062 E450A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 2062 E450A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3000–4400 mm (118.11–173.23 in)
AS/NZS Grade 500
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3600 mm (122.05–141.73 in)
On M-EX Right Now
IS 2062 E450A
2 active listings and RFQs →
AS/NZS Grade 500
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E450A and AS/NZS Grade 500?
IS 2062 E450A specifies CEV which is not specified for AS/NZS Grade 500.
Can IS 2062 E450A be substituted with AS/NZS Grade 500?
IS 2062 E450A and AS/NZS Grade 500 overlap closely enough on chemistry and mechanical properties that AS/NZS Grade 500 is often considered as a substitute for IS 2062 E450A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.