Post Stock Login Register

IS 3195 52Cr4Mo2V vs GB/T 1222 55CrMnA

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 3195 52Cr4Mo2V (IS 3195:1992) and GB/T 1222 55CrMnA (GB/T 1222-2016) are both steel grades. Both fall under the Spring Steel category. IS 3195 52Cr4Mo2V is typically used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword), while GB/T 1222 55CrMnA is commonly used for automotive leaf springs, coil springs. IS 3195 52Cr4Mo2V is defined under Bureau of Indian Standards (IS), originating from India, while GB/T 1222 55CrMnA is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, IS 3195 52Cr4Mo2V vs GB/T 1222 55CrMnA is a 67.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 3195 52Cr4Mo2V:
IS 3195 113C6 IS 3195 50Cr4V2 IS 5517 55Cr3 EN 10089 55Cr3 IS 3195 98C6 IS 3431 60Cr4V2 EN 10089 50CrV4 IS 3195 55Si7 IS 3431 50Cr4V2 EN 10083-3 51CrV4 IS 3195 60Si7 IS 3195 60Cr4V2
Match Breakdown
CHEMISTRY MATCH
67.7%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 3195 52Cr4Mo2V GB/T 1222 55CrMnA
Standard IS 3195:1992 GB/T 1222-2016
Category Spring Steel Spring Steel
C (%) 0.48-0.56 0.52–0.60
Cr (%) 0.90-1.20 0.65–0.95
Mn (%) 0.70-1.10 0.70–1.00
Mo (%) 0.15-0.25 Not specified
P (%) <=0.030 Not specified
S (%) <=0.030 Not specified
Si (%) 0.15-0.40 0.17–0.37
V (%) 0.07-0.12 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 3195 52Cr4Mo2V GB/T 1222 55CrMnA
Hardness, annealed <=255 HB Not specified
Hardness, untreated (hot rolled) about 310 HB (for guidance only) Not specified
Tensile Strength Not specified ≥1225 MPa
Yield Strength Not specified ≥1080 MPa
Elongation Not specified ≥6%
Typical Applications
IS 3195 52Cr4Mo2V
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
GB/T 1222 55CrMnA
Automotive leaf springs, coil springs
Key Differences
Can IS 3195 52Cr4Mo2V Be Substituted With GB/T 1222 55CrMnA?
IS 3195 52Cr4Mo2V and GB/T 1222 55CrMnA share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 3195 52Cr4Mo2V
No active listings currently.
GB/T 1222 55CrMnA
Round Bar → (2 listings)
Diameter: 30–30 mm (1.18–1.18 in)
Length: 5600–7000 mm (220.47–275.59 in)
On M-EX Right Now
IS 3195 52Cr4Mo2V
0 active listings and RFQs →
GB/T 1222 55CrMnA
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 3195 52Cr4Mo2V and GB/T 1222 55CrMnA?
IS 3195 52Cr4Mo2V specifies Mo, P, S, V which are not specified for GB/T 1222 55CrMnA.
Can IS 3195 52Cr4Mo2V be substituted with GB/T 1222 55CrMnA?
IS 3195 52Cr4Mo2V and GB/T 1222 55CrMnA share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.