Post Stock Login Register

IS 3195 52Cr4Mo2V vs IS 3195 113C6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 3195 52Cr4Mo2V (IS 3195:1992) and IS 3195 113C6 (IS 3195:1992) are both steel grades. Both fall under the Spring Steel category. IS 3195 52Cr4Mo2V is typically used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword), while IS 3195 113C6 is commonly used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword). IS 3195 52Cr4Mo2V is defined under Bureau of Indian Standards (IS), originating from India, while IS 3195 113C6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 3195 52Cr4Mo2V vs IS 3195 113C6 is a 60.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 3195 52Cr4Mo2V:
IS 3195 50Cr4V2 IS 5517 55Cr3 EN 10089 55Cr3 IS 3195 98C6 IS 3431 60Cr4V2 EN 10089 50CrV4 IS 3195 55Si7 IS 3431 50Cr4V2 EN 10083-3 51CrV4 GB/T 1222 55CrMnA IS 3195 60Si7 IS 3195 60Cr4V2
Match Breakdown
CHEMISTRY MATCH
60.9%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property IS 3195 52Cr4Mo2V IS 3195 113C6
Standard IS 3195:1992 IS 3195:1992
Category Spring Steel Spring Steel
C (%) 0.48-0.56 1.05-1.20
Cr (%) 0.90-1.20 Not specified
Mn (%) 0.70-1.10 0.50-0.80
Mo (%) 0.15-0.25 Not specified
P (%) <=0.030 <=0.050
S (%) <=0.030 <=0.050
Si (%) 0.15-0.40 0.15-0.35
V (%) 0.07-0.12 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 3195 52Cr4Mo2V IS 3195 113C6
Hardness, annealed <=255 HB <=240 HB
Hardness, untreated (hot rolled) about 310 HB (for guidance only) Not specified
Typical Applications
IS 3195 52Cr4Mo2V
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
IS 3195 113C6
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
Key Differences
Can IS 3195 52Cr4Mo2V Be Substituted With IS 3195 113C6?
IS 3195 52Cr4Mo2V and IS 3195 113C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 3195 52Cr4Mo2V
0 active listings and RFQs →
IS 3195 113C6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 3195 52Cr4Mo2V and IS 3195 113C6?
IS 3195 52Cr4Mo2V specifies Cr, Mo, V which are not specified for IS 3195 113C6.
Can IS 3195 52Cr4Mo2V be substituted with IS 3195 113C6?
IS 3195 52Cr4Mo2V and IS 3195 113C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.