Post Stock Login Register

IS 4367 10Cr9Mo10 vs EN 10028-2 12CrMo9-10

Related Material — 67.5% match based on chemical composition and mechanical property overlap.

IS 4367 10Cr9Mo10 (IS 4367:1991) and EN 10028-2 12CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10028-2 12CrMo9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 4367 10Cr9Mo10 vs EN 10028-2 12CrMo9-10 is a 81.6% match. As per mechanical properties, the match is 39.3%. Combined, this makes them a related material overall at 67.5%.

Frequently Compared With IS 4367 10Cr9Mo10:
IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 UNI 11234 100Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 NF A35-565 100C6 IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 7) 12Cr2Mo5V2H IS 1570 (Part 7) 12Cr4Mo5H
Match Breakdown
CHEMISTRY MATCH
81.6%
MECHANICAL MATCH
39.3%
OVERALL
67.5%
Specifications
Property IS 4367 10Cr9Mo10 EN 10028-2 12CrMo9-10
Standard IS 4367:1991 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) <=0.15 0.10-0.15
Si (%) <=0.50 <=0.30
Mn (%) 0.40-0.70 0.30-0.80
Ni (%) <=0.30 <=0.30
Cr (%) 2.00-2.50 2.00-2.50
Mo (%) 0.90-1.10 0.90-1.10
S (%) <=0.035 <=0.010
P (%) <=0.035 <=0.015
N (%) Not specified <=0.012
Cu (%) Not specified <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4367 10Cr9Mo10 EN 10028-2 12CrMo9-10
Tensile Strength 410-590 MPa 540-690 MPa
Yield Strength 245 MPa min >=355 MPa
Elongation >=18% >=18%
Izod Impact 55 J min Not specified
Hardness (soft annealed) <=187 HB Not specified
Condition Normalised and tempered, ruling section up to 50 mm Usual delivery condition normalized and tempered (+NT) or quenched and tempered (+QT), nominal thickness up to 250 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
IS 4367 10Cr9Mo10
Not documented
EN 10028-2 12CrMo9-10
Flat products for pressure purposes
Key Differences
Can IS 4367 10Cr9Mo10 Be Substituted With EN 10028-2 12CrMo9-10?
IS 4367 10Cr9Mo10 and EN 10028-2 12CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 4367 10Cr9Mo10
0 active listings and RFQs →
EN 10028-2 12CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4367 10Cr9Mo10 and EN 10028-2 12CrMo9-10?
EN 10028-2 12CrMo9-10 specifies N, Cu which are not specified for IS 4367 10Cr9Mo10.
Can IS 4367 10Cr9Mo10 be substituted with EN 10028-2 12CrMo9-10?
IS 4367 10Cr9Mo10 and EN 10028-2 12CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.