Post Stock Login Register

IS 4367 50Cr4V2 vs IS 1570 (Part 4) 50Cr4V2

Strong Match — 98.3% match based on chemical composition and mechanical property overlap.

IS 4367 50Cr4V2 (IS 4367:1991) and IS 1570 (Part 4) 50Cr4V2 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. IS 4367 50Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 4) 50Cr4V2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 4367 50Cr4V2 vs IS 1570 (Part 4) 50Cr4V2 is a 98.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 98.3%.

Frequently Compared With IS 4367 50Cr4V2:
IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 NF A35-565 100C6
Match Breakdown
CHEMISTRY MATCH
98.3%
MECHANICAL MATCH
No shared data
OVERALL
98.3%
Specifications
Property IS 4367 50Cr4V2 IS 1570 (Part 4) 50Cr4V2
Standard IS 4367:1991 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.45-0.55 0.45-0.55
Si (%) 0.10-0.35 0.10-0.35
Mn (%) 0.50-0.80 0.50-0.80
Cr (%) 0.90-1.20 0.90-1.20
V (%) 0.15-0.30 0.15-0.30
S (%) <=0.035 Not specified
P (%) <=0.035 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4367 50Cr4V2 IS 1570 (Part 4) 50Cr4V2
Tensile Strength 900-1100 MPa Not specified
Yield Strength 700 MPa min Not specified
Elongation >=12% Not specified
Izod Impact 45 J min Not specified
Hardness 266-325 HB Not specified
Hardness (soft annealed) <=240 HB Not specified
Condition Hardened and tempered, ruling section up to 100 mm Not specified
Key Differences
Can IS 4367 50Cr4V2 Be Substituted With IS 1570 (Part 4) 50Cr4V2?
IS 4367 50Cr4V2 and IS 1570 (Part 4) 50Cr4V2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 50Cr4V2 is often considered as a substitute for IS 4367 50Cr4V2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 4367 50Cr4V2
0 active listings and RFQs →
IS 1570 (Part 4) 50Cr4V2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4367 50Cr4V2 and IS 1570 (Part 4) 50Cr4V2?
IS 4367 50Cr4V2 specifies S, P which are not specified for IS 1570 (Part 4) 50Cr4V2.
Can IS 4367 50Cr4V2 be substituted with IS 1570 (Part 4) 50Cr4V2?
IS 4367 50Cr4V2 and IS 1570 (Part 4) 50Cr4V2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 50Cr4V2 is often considered as a substitute for IS 4367 50Cr4V2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.