Post Stock Login Register

IS 4367 21Cr4Mo2 vs IS 4367 10Cr9Mo10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 4367 21Cr4Mo2 (IS 4367:1991) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. IS 4367 21Cr4Mo2 is defined under Bureau of Indian Standards (IS), originating from India, while IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 4367 21Cr4Mo2 vs IS 4367 10Cr9Mo10 is a 66.4% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 4367 21Cr4Mo2:
NF A35-565 100C6 UNI 11234 100Cr6 GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
66.4%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property IS 4367 21Cr4Mo2 IS 4367 10Cr9Mo10
Standard IS 4367:1991 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) <=0.26 <=0.15
Si (%) 0.10-0.35 <=0.50
Mn (%) 0.50-0.80 0.40-0.70
Cr (%) 0.90-1.20 2.00-2.50
Mo (%) 0.15-0.30 0.90-1.10
S (%) <=0.035 <=0.035
P (%) <=0.035 <=0.035
Ni (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4367 21Cr4Mo2 IS 4367 10Cr9Mo10
Tensile Strength 650-800 MPa 410-590 MPa
Yield Strength 420 MPa min 245 MPa min
Elongation >=16% >=18%
Izod Impact 60 J min 55 J min
Hardness 190-235 HB Not specified
Hardness (soft annealed) <=210 HB <=187 HB
Condition Hardened and tempered, ruling section up to 150 mm Normalised and tempered, ruling section up to 50 mm
Typical Applications
IS 4367 21Cr4Mo2
Gears, shafts, studs, bolts, automotive transmission components, high-strength fasteners.
IS 4367 10Cr9Mo10
Not documented
Key Differences
Can IS 4367 21Cr4Mo2 Be Substituted With IS 4367 10Cr9Mo10?
IS 4367 21Cr4Mo2 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 4367 21Cr4Mo2
Round Bar → (4 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5400–7000 mm (212.6–275.59 in)
IS 4367 10Cr9Mo10
No active listings currently.
On M-EX Right Now
IS 4367 21Cr4Mo2
4 active listings and RFQs →
IS 4367 10Cr9Mo10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4367 21Cr4Mo2 and IS 4367 10Cr9Mo10?
IS 4367 10Cr9Mo10 specifies Ni which is not specified for IS 4367 21Cr4Mo2.
Can IS 4367 21Cr4Mo2 be substituted with IS 4367 10Cr9Mo10?
IS 4367 21Cr4Mo2 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.