Post Stock Login Register

IS 4432 C10 vs BS 970 (Part 1) 045M10

Related Material — 59% match based on chemical composition and mechanical property overlap.

IS 4432 C10 (IS 4432:1967) and BS 970 (Part 1) 045M10 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. IS 4432 C10 is typically used for bolts, nuts, shafts, pins, general engineering parts, structural components, welded assemblies, while BS 970 (Part 1) 045M10 is commonly used for case hardening steel (section four). IS 4432 C10 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 1) 045M10 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, IS 4432 C10 vs BS 970 (Part 1) 045M10 is a 88.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 59%.

Frequently Compared With IS 4432 C10:
BS 970 (Part 1) 080A20 BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 045A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A04 BS 970 (Part 3) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A32
Match Breakdown
CHEMISTRY MATCH
88.6%
MECHANICAL MATCH
0%
OVERALL
59%
Specifications
Property IS 4432 C10 BS 970 (Part 1) 045M10
Standard IS 4432:1967 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) <=0.15 0.07-0.13
Mn (%) 0.30-0.60 0.30-0.60
Si (%) 0.15-0.35 Not specified
S (%) <=0.045 Not specified
P (%) <=0.045 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 4432 C10 BS 970 (Part 1) 045M10
Tensile Strength 340-420 MPa 430 MPa min
Yield Strength >=187 MPa Not specified
Elongation >=26% 18 % min
Hardness <=120 HB Not specified
Condition Not specified Case hardened, 19 mm test bar
Typical Applications
IS 4432 C10
bolts, nuts, shafts, pins, general engineering parts, structural components, welded assemblies
BS 970 (Part 1) 045M10
Case hardening steel (section four)
Key Differences
Can IS 4432 C10 Be Substituted With BS 970 (Part 1) 045M10?
IS 4432 C10 and BS 970 (Part 1) 045M10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 4432 C10
Round Bar → (5 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5000–6900 mm (196.85–271.65 in)
BS 970 (Part 1) 045M10
No active listings currently.
On M-EX Right Now
IS 4432 C10
5 active listings and RFQs →
BS 970 (Part 1) 045M10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 4432 C10 and BS 970 (Part 1) 045M10?
IS 4432 C10 specifies Si, S, P which are not specified for BS 970 (Part 1) 045M10.
Can IS 4432 C10 be substituted with BS 970 (Part 1) 045M10?
IS 4432 C10 and BS 970 (Part 1) 045M10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.