Strong Match — 92.4% match
based on chemical composition and mechanical property overlap.
IS 4432 C10 (IS 4432:1967) and BS 970 (Part 3) 045M10 (BS 970 (Part 3):1991) are both steel grades.
Both fall under the Carbon Steel category.
IS 4432 C10 is typically used for bolts, nuts, shafts, pins, general engineering parts, structural components, welded assemblies, while BS 970 (Part 3) 045M10 is commonly used for bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; case hardening steel, carbon and carbon manganese (table 14).
IS 4432 C10 is defined under Bureau of Indian Standards (IS), originating from India, while BS 970 (Part 3) 045M10 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, IS 4432 C10 vs BS 970 (Part 3) 045M10 is a 92.4% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 92.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; case hardening steel, carbon and carbon manganese (Table 14)
Can IS 4432 C10 Be Substituted With BS 970 (Part 3) 045M10?
IS 4432 C10 and BS 970 (Part 3) 045M10 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 045M10 is often considered as a substitute for IS 4432 C10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 4432 C10 and BS 970 (Part 3) 045M10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 4432 C10 be substituted with BS 970 (Part 3) 045M10?
IS 4432 C10 and BS 970 (Part 3) 045M10 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 3) 045M10 is often considered as a substitute for IS 4432 C10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.