Post Stock Login Register

IS 5517 40Ni14 vs EN 10028-2 10CrMo9-10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 5517 40Ni14 (IS 5517:1993) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. IS 5517 40Ni14 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10028-2 10CrMo9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 5517 40Ni14 vs EN 10028-2 10CrMo9-10 is a 53.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 5517 40Ni14:
IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 UNI 11234 100Cr6 IS 1570 (Part 7) 10Cr36Mo10H NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
53.6%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property IS 5517 40Ni14 EN 10028-2 10CrMo9-10
Standard IS 5517:1993 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.35-0.45 0.08-0.14
Si (%) 0.10-0.35 <=0.50
Mn (%) 0.50-0.80 0.40-0.80
Ni (%) 3.20-3.60 Not specified
Cr (%) <=0.30 2.00-2.50
S (%) <=0.035 <=0.010
P (%) <=0.035 <=0.020
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Mo (%) Not specified 0.90-1.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 40Ni14 EN 10028-2 10CrMo9-10
Tensile Strength 800-950 MPa 480-630 MPa
Yield Strength (0.2% proof) 600 MPa min Not specified
Elongation >=16% >=18%
Izod Impact 55 J min Not specified
Hardness (annealed) <=229 HB Not specified
Condition Hardened and tempered, ruling section up to 100 mm Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Yield Strength Not specified >=310 MPa
Typical Applications
IS 5517 40Ni14
Not documented
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can IS 5517 40Ni14 Be Substituted With EN 10028-2 10CrMo9-10?
IS 5517 40Ni14 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 5517 40Ni14
0 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 40Ni14 and EN 10028-2 10CrMo9-10?
IS 5517 40Ni14 specifies Ni which is not specified for EN 10028-2 10CrMo9-10. EN 10028-2 10CrMo9-10 specifies N, Cu, Mo which are not specified for IS 5517 40Ni14.
Can IS 5517 40Ni14 be substituted with EN 10028-2 10CrMo9-10?
IS 5517 40Ni14 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.