Post Stock Login Register

IS 5517 46V1S3 vs CSA G40.21 350WT

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 5517 46V1S3 (IS 5517:1993) and CSA G40.21 350WT (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Alloy Steel category. IS 5517 46V1S3 is defined under Bureau of Indian Standards (IS), originating from India, while CSA G40.21 350WT is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, IS 5517 46V1S3 vs CSA G40.21 350WT is a 73.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 5517 46V1S3:
NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 7) 12Cr2Mo5V2H IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 UNI 11234 100Cr6
Match Breakdown
CHEMISTRY MATCH
73.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 5517 46V1S3 CSA G40.21 350WT
Standard IS 5517:1993 CSA G40.21-13 (R2023)
Category Alloy Steel Alloy Steel
C (%) 0.42-0.50 <=0.22
Si (%) <=0.60 Not specified
Mn (%) 0.60-1.00 <=1.60
V (%) 0.08-0.13 Not specified
S (%) 0.045-0.065 <=0.035
P (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 46V1S3 CSA G40.21 350WT
Hardness (annealed) <=220 HB Not specified
Tensile Strength Not specified 480-650 MPa
Yield Strength Not specified 350 MPa min
Elongation Not specified 18-22 %
Typical Applications
IS 5517 46V1S3
Not documented
CSA G40.21 350WT
bridges,offshore structures,heavy fabrication,pressure vessels,cranes,structural components
Key Differences
Can IS 5517 46V1S3 Be Substituted With CSA G40.21 350WT?
IS 5517 46V1S3 and CSA G40.21 350WT share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 5517 46V1S3
No active listings currently.
CSA G40.21 350WT
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6600–7000 mm (259.84–275.59 in)
On M-EX Right Now
IS 5517 46V1S3
0 active listings and RFQs →
CSA G40.21 350WT
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 46V1S3 and CSA G40.21 350WT?
IS 5517 46V1S3 specifies Si, V which are not specified for CSA G40.21 350WT.
Can IS 5517 46V1S3 be substituted with CSA G40.21 350WT?
IS 5517 46V1S3 and CSA G40.21 350WT share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.