Post Stock Login Register

IS 5517 46V1S3 vs IS 5517 37Mn5Si5

Close Alternative — 81% match based on chemical composition and mechanical property overlap.

IS 5517 46V1S3 (IS 5517:1993) and IS 5517 37Mn5Si5 (IS 5517:1993) are both steel grades. Both fall under the Alloy Steel category. IS 5517 46V1S3 is defined under Bureau of Indian Standards (IS), originating from India, while IS 5517 37Mn5Si5 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 5517 46V1S3 vs IS 5517 37Mn5Si5 is a 71.4% match. As per mechanical properties, the match is 100%. Combined, this makes them a close alternative overall at 81%.

Frequently Compared With IS 5517 46V1S3:
NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 7) 12Cr2Mo5V2H IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 UNI 11234 100Cr6
Match Breakdown
CHEMISTRY MATCH
71.4%
MECHANICAL MATCH
100%
OVERALL
81%
Specifications
Property IS 5517 46V1S3 IS 5517 37Mn5Si5
Standard IS 5517:1993 IS 5517:1993
Category Alloy Steel Alloy Steel
C (%) 0.42-0.50 0.33-0.41
Si (%) <=0.60 1.10-1.40
Mn (%) 0.60-1.00 1.10-1.40
V (%) 0.08-0.13 Not specified
S (%) 0.045-0.065 <=0.035
P (%) <=0.035 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5517 46V1S3 IS 5517 37Mn5Si5
Hardness (annealed) <=220 HB <=220 HB
Tensile Strength Not specified 800-950 MPa
Yield Strength (0.2% proof) Not specified 550 MPa min
Elongation Not specified >=14%
Izod Impact Not specified 34 J min
Condition Not specified Hardened and tempered, ruling section up to 100 mm
Key Differences
Can IS 5517 46V1S3 Be Substituted With IS 5517 37Mn5Si5?
IS 5517 46V1S3 and IS 5517 37Mn5Si5 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
IS 5517 46V1S3
0 active listings and RFQs →
IS 5517 37Mn5Si5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5517 46V1S3 and IS 5517 37Mn5Si5?
IS 5517 46V1S3 specifies V which is not specified for IS 5517 37Mn5Si5.
Can IS 5517 46V1S3 be substituted with IS 5517 37Mn5Si5?
IS 5517 46V1S3 and IS 5517 37Mn5Si5 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.