Post Stock Login Register

IS 5522 X07Cr18Ni9 vs GB/T 3280 06Cr19Ni10

Related Material — 56.5% match based on chemical composition and mechanical property overlap.

IS 5522 X07Cr18Ni9 (IS 5522:2014) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. IS 5522 X07Cr18Ni9 is typically used for utensils, while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.. IS 5522 X07Cr18Ni9 is defined under Bureau of Indian Standards (IS), originating from India, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, IS 5522 X07Cr18Ni9 vs GB/T 3280 06Cr19Ni10 is a 84.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 56.5%.

Frequently Compared With IS 5522 X07Cr18Ni9:
ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
84.7%
MECHANICAL MATCH
0%
OVERALL
56.5%
Specifications
Property IS 5522 X07Cr18Ni9 GB/T 3280 06Cr19Ni10
Standard IS 5522:2014 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) <=0.12 0.08 max
Si (%) <=0.75 1.00 max
Mn (%) <=2.00 2.00 max
Ni (%) 8.0-10.0 8.00-11.00
Cr (%) 17.0-19.0 18.00-20.00
S (%) <=0.030 0.030 max
P (%) <=0.045 0.045 max
N (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 5522 X07Cr18Ni9 GB/T 3280 06Cr19Ni10
Tensile Strength >=515 MPa 520-720 MPa
Yield Strength >=205 MPa 205-310 MPa
Elongation >=40% 40-60%
Hardness <=201 HB 187 HB max
Condition Annealed/softened Not specified
Typical Applications
IS 5522 X07Cr18Ni9
Utensils
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can IS 5522 X07Cr18Ni9 Be Substituted With GB/T 3280 06Cr19Ni10?
IS 5522 X07Cr18Ni9 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 5522 X07Cr18Ni9
No active listings currently.
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
IS 5522 X07Cr18Ni9
0 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 5522 X07Cr18Ni9 and GB/T 3280 06Cr19Ni10?
IS 5522 X07Cr18Ni9 specifies N which is not specified for GB/T 3280 06Cr19Ni10.
Can IS 5522 X07Cr18Ni9 be substituted with GB/T 3280 06Cr19Ni10?
IS 5522 X07Cr18Ni9 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.