Post Stock Login Register

IS 6603 X01Cr25Ni21 vs EN 10088-1 X1CrNiMoCuN25-25-5

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 6603 X01Cr25Ni21 (IS 6603:2024) and EN 10088-1 X1CrNiMoCuN25-25-5 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X01Cr25Ni21 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X1CrNiMoCuN25-25-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 6603 X01Cr25Ni21 vs EN 10088-1 X1CrNiMoCuN25-25-5 is a 71% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 6603 X01Cr25Ni21:
GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
71%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 6603 X01Cr25Ni21 EN 10088-1 X1CrNiMoCuN25-25-5
Standard IS 6603:2024 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.020 <=0.020
Si (%) <=0.25 <=0.70
Mn (%) <=2.00 <=2.00
P (%) <=0.025 <=0.030
S (%) <=0.010 <=0.010
Cr (%) 24.0-26.0 24.0-26.0
Mo (%) <=0.20 4.7-5.7
Ni (%) 20.0-22.0 24.0-27.0
N (%) <=0.10 0.17-0.25
Cu (%) Not specified 1.00-2.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X01Cr25Ni21 EN 10088-1 X1CrNiMoCuN25-25-5
Tensile Strength 470-670 MPa Not specified
Condition Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, rod only; Yield Strength is Rp0.2, Elongation is A (longitudinal) Not specified
Typical Applications
IS 6603 X01Cr25Ni21
General purposes, semi-finished products, bars, wire rods and bright bars
EN 10088-1 X1CrNiMoCuN25-25-5
Not documented
Key Differences
Can IS 6603 X01Cr25Ni21 Be Substituted With EN 10088-1 X1CrNiMoCuN25-25-5?
IS 6603 X01Cr25Ni21 and EN 10088-1 X1CrNiMoCuN25-25-5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 6603 X01Cr25Ni21
0 active listings and RFQs →
EN 10088-1 X1CrNiMoCuN25-25-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X01Cr25Ni21 and EN 10088-1 X1CrNiMoCuN25-25-5?
EN 10088-1 X1CrNiMoCuN25-25-5 specifies Cu which is not specified for IS 6603 X01Cr25Ni21.
Can IS 6603 X01Cr25Ni21 be substituted with EN 10088-1 X1CrNiMoCuN25-25-5?
IS 6603 X01Cr25Ni21 and EN 10088-1 X1CrNiMoCuN25-25-5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.